468917
11
Zoom out
Zoom in
Previous page
1/23
Next page
Your 4-button/12-channel remote controls
The 4-button/12-channel remote control is an ultra-sophisticated miniature radio
transmitter powered by a tiny 12-volt battery. The range is up to 100 feet. Obstructions,
electrical interference, weather conditions or a weak battery will reduce the range. Your
4-button/12-channel remote control is the key to your Concept 50. It incorporates
Clifford’s proprietary Anti-Code- Grabbing™ (ACG) technology with Random Code
Generation for the ultimate in protection against “code-grabbing” devices (see page 12).
You will use the remote to arm and disarm the system, lock and unlock the doors,
activate the system’s panic feature, adjust sensor sensitivity, activate the headlights,
control Remote QuickAccess features or command options such as remote trunk release,
remote memory seat adjustment and even remote starting of the engine and heater or air
conditioner, among other available options.
How to use your keychain
remote control
Your remote control can
individually command up
to 12 different system
functions and options. It’s
like having a TV with 12
channels. You change
channels (functions) with
your keychain remote
control. But instead of
putting 12 buttons on the
remote control, we made it
easy: First, the button you
use the most — button 1 to
arm, disarm,lock and unlock the doors — is larger than the others. Buttons 2, 3 and 4 are
the smaller buttons to the right, below and left of button 1. The LevelShift button on the
side permits you to select channels 5–12 with the same four buttons.
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For
instance, to transmit channel 3, press button 3. While you transmit, the LED
indicator will blink once every second: this indicates level 1.
To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts
buttons 1–4 to level 2 (channels 5–8). Then press the desired button
within the next
7 seconds
. For instance, to transmit channel 5, press the LevelShift button once,
then press button 1. While you transmit, you’ll notice that the LED indicator
blinks twice, pauses, blinks twice, etc.: this indicates level 2.
To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts
buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button within
the next 7 seconds. For instance, to transmit channel 10, press the LevelShift button
twice, then press button 2. While you transmit, you’ll notice that the LED blinks
three times, pauses, blinks three times, etc.: this indicates level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12), the
remote control automatically returns to level 1 (channels 1–4).
9
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clifford Concept 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clifford Concept 50 in the language / languages: English as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info