646270
27
Zoom out
Zoom in
Previous page
1/60
Next page
27
If needed, clean the housing with a damp, soft cloth. Then dry it with a soft cloth.
Regularly remove hairs and lint from the nozzles.
The lters may discolour over time. This is normal and also does not affect
functionality.
Emptying the dust bin
1. Remove the suction hose from the dust bin (see chapter “Assembly, section “Inser-
ting/removing the hose”).
2. Push the release button on the dust bin and pull it out of
the device by the handle.
3. Hold the dust bin over an open garbage bin. The dust bin
should be as close as possible to the garbage bin so that
dust from the dust bin only falls into the garbage bin and
is not dispersed in the surrounding area.
4. Push the button to open the dust bin. The bottom of the
dust bin will open and the dirt will fall out.
5. Shut the bottom of the dust bin again. The fastener must
audibly lock into place.
6. Insert the dust bin in the device: Take hold of it by the
handle and insert the bottom of the bin in the device rst.
Then push the handle against the device housing until the
dust bin audibly locks into place. Hold the device by the
handle and lift it to check whether the dust bin is properly
seated.
Cleaning the dust lter
The dust lter is located in the dust bin.
1. Remove the suction hose from the device (see chapter “Assembly, section “Inser-
ting/removing the hose”).
2. Push the release button on the dust bin and pull it out of the device by the handle.
3. Turn the dust bin cover to remove it. NOTE: Orientation
marks for the removal and placement of the cover are pro-
vided on the cover and dust bin. You can remove the co-
ver when the mark on the dust bin is pointing towards the
open lock symbol on the cover.
4. Pull the dust bin cover with the dust lter out.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 08938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 08938 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info