646270
25
Zoom out
Zoom in
Previous page
1/60
Next page
25
Mounting/removing suction nozzles
Insert the open end of the telescoping tube in one of the enclosed suction nozzles
up to the stop. Turn the nozzle back and forth slightly in the process.
The suction nozzles can also be attached directly to the suction hose without the
telescoping tube for more exibility.
To remove a suction nozzle pull it off.
Removing/inserting the dust bin
Removal: Push the release button on the dust bin and
take it out of the device by the handle.
Insertion: Take the dust bin by the handle and rst place
the bottom of the bin in the device (the bottom is facing
down and handle is facing up). Then push the hand-
le against the device housing until the dust bin audibly
locks into place. Hold the device by the handle and lift it to
check whether the dust bin is properly seated.
Operation
ATTENTION!
During use, always keep the nozzles away from body parts and animals and do not
reach into them. You could be caught or injured. If something does get caught in the
vacuum cleaner, turn it off immediately (depress the On/Off switch
).
Only turn on the vacuum cleaner once you are sure that all parts have been
completely mounted and that the dust bin, dust lter and the exhaust lter have
been properly inserted.
To prevent the cord from becoming too hot when in use, pull at least two thirds of
its entire length out of the device before you switch on the vacuum cleaner. Do not
forcefully pull out the cord up to the stop point (no further than up to the red mark on
the cord) in order to prevent damage!
Always turn off the device rst and pull the mains plug out of the socket before you
change a nozzle or attach or remove other accessories!
Do not in any case vacuum up the following:
Liquids or wet materials (such as wet carpet shampoo)
smouldering ashes, cigarette butts, matches etc.
ammable or ignitable materials
very ne dust (e.g. cement dust), ash or toner
hard, pointy objects such as bigger glass shards
1. Make sure that the respective accessory is properly mounted on the device (see
chapter “Assembly”).
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 08938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 08938 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info