646270
26
Zoom out
Zoom in
Previous page
1/60
Next page
26
2. Pull the mains cord only as far out of the housing as you need, ideally up to the yel-
low mark, but no further than up to the red mark on the cord!
3. Insert the mains plug in a properly installed socket that is easily accessible.
4. Press the On/Off switch
to turn the vacuum cleaner on.
5. You can individually adjust the suction power with the suction power control.
6. Move the nozzle over the surface you want to clean. You can pull the vacuum cleaner
like a sled when vacuum cleaning.
7. After vacuum cleaning, press the On/Off switch
again to turn off the vacuum
cleaner.
8. Pull the mains plug out of the socket, rmly hold the mains cord and push the button
for the cord winder down with your foot. By holding the mains cord, you prevent
the cord from “lashing” against your legs for example.
9. If you used the oor nozzle, hook it into the bracket on the back of the device.
10. To ensure optimum performance of the device, empty the dust bin each time after
using the device and clean the dust lter and exhaust lter regularly (see chapter
“Cleaning the device”).
Tip: Am An auxiliary air valve is located on the
handle. Slide the cover to open it, thereby reducing
the suction power if you want to vacuum off cushions,
carpets or light-weight, moveable objects or
materials.
Normally, the auxiliary air valve is closed so as not to
unnecessarily reduce the suction power.
Cleaning the device
ATTENTION!
Empty the dust bin when it is full and clean the lters regularly to avoid overheating
the motor.
Before cleaning the device, always pull the power plug out of the socket.
Keep the device, cord and mains plug away from water or other liquids in order to
avoid electrical shocks. When cleaning, make sure that no liquid penetrates the
device. Only the foam dust lter, plastic dust lter, micro lter and exhaust lter may
be cleaned with water. However, they must be completely dry when being placed
back in the device.
The lters are not suitable for the washing machine, dishwasher or dryer! Only air
dry the lters and do not in any case use a hair dryer.
Do not use any scouring or abrasive cleaners or cleaning pads for cleaning. They
could damage the surface.
Clean the dust lter and exhaust lter regularly or if you notice that the suction power
is declining.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx Z 08938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx Z 08938 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info