703408
20
Zoom out
Zoom in
Previous page
1/44
Next page
EN 20
6. Turn the timer (7) clockwise and set it to the length of time you want. Each LED light
represents 5 minutes.
7. Once the nylon balloon has in ated, straighten out the garment and smooth it down
again.
8. When the set time elapses, the device switches off automatically. The drying / press-
ing process can be interrupted at any time by turning the timer to the starting position.
9. Remove the garment from the nylon balloon and hanger (1).
10. Pull the mains plug out of the plug socket and allow the device to cool down completely.
Presser for trousers
1. If you have not yet done so, attach the nylon balloon (2)
(see the “Assembly” chapter).
The nylon balloon should sit immediately below the
mounting ange so that it can fully in ate.
2. Pull the garment which is to be pressed over the nylon balloon and do up the zip or
buttons if necessary. Make sure that
the legs of the nylon balloon t properly into the legs of the trousers and are not
twisted or scrunched up,
all buttons on the garment (including the legs) are done up.
3. Spread the clamps along the bottom of the garment (at the front and back in each
case on the outsides) so that it is weighed down and will not go out of shape when
the nylon balloon is in ated.
4. Insert the mains plug into an easily accessible socket.
5. Turn the timer (7) clockwise and set it to the length of time you want. Each LED light
represents 5 minutes.
6. Once the nylon balloon has in ated, straighten out the garment and smooth it down
again.
7. Remove the garment from the nylon balloon after the completion of the drying/press-
ing process.
8. Pull the mains plug out of the plug socket and allow the device to cool down completely.
Tips
The device is intended primarily for machine-spun laundry! If hand-washed or non-
machine-spun laundry is to be pressed, rst allow it to dry out a little rst.
• The drying / pressing process takes around 10 minutes for a spun-dried shirt or
trousers. However, the length of time can vary depending on the material and thick-
ness of the material. We recommend that you start with a shorter time and extend it
if necessary.
• The nylon balloon for blouses and shirts can be enlarged or reduced in size with
the aid of the zip fasteners. For smaller sizes, the zip fasteners should be closed. For
larger sizes, the zip fasteners should be opened on both sides.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx EL17001-00100 - Z07252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx EL17001-00100 - Z07252 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info