703408
18
Zoom out
Zoom in
Previous page
1/44
Next page
EN 18
Before Initial Use
PLEASE NOTE!
Never remove the rating plate and any possible warnings!
Before using the device, remove all packaging materials and any labels that may be on
the device and are used for protection during transportation or for advertising.
Assembly
Presser for blouses and shirts
1. Plug the telescopic rod (2) into the recess on the top of the motor unit (5).
2. Place the hanger (1) onto the telescopic rod. When you do this, make sure that the
slight bend in the hanger points forwards. The hanger must be heard to engage on
the telescopic rod.
The drip protection (3) must be located directly above the fan (4). It prevents any
water that may drip down from being able to get into the fan.
3. Attach the nylon balloon:
Pull it over the hanger. When you do this, make sure that the side with the hole line
points forwards.
Pull the small elastic cord at the top over the collar section (10) on the hanger.
Pull the large elastic cord at the bottom over the mounting ange (8).
The device is disassembled in the reverse order.
Presser for trousers
1. Insert the rod with the drip protection into the recess which
is provided for it on the main device.
2. Fit the Y tube (11) on the rod with the drip protection.
3. Insert the two rods (13) into the Y tube.
4. Attach the nylon balloon (12):
draw it over the two rods
.
draw the elastic over the mounting ange on the main
device.
The device is disassembled in the reverse order.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cleanmaxx EL17001-00100 - Z07252 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cleanmaxx EL17001-00100 - Z07252 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info