Manual Clatronic KM 3674 (page 62 of 106) (English, German, Dutch, French, Italian, Polish, Spanish)

814179

Zoom out

Zoom in

1/106

KM3674_IM 22.06.17

Assembly of the Pasta Attachments (See Fig. E)

NOTE:

If the pasta dough is very sticky, lubricate the worm with a

few drops of cooking oil.

Proceed as described under “Preparation”.

6. Select a pasta attachment (34).

7. Place the attachment on the axis of the spiral. Pay atten-

tion to the recesses on the pasta attachment.

More details can be found under “Attach Preassembled

Worm Housing”.

Attach Preassembled Worm Housing

8. Screw the locking ring (28) clockwise onto the spiral

housing.

9. Attach the pre-assembled worm housing to the appliance.

Position the worm housing with the arrow ( ) aligned

with ( ) on the appliance. Turn to the upright position.

The arrow on the worm housing must be opposite the

arrow on the appliance. (Refer to the gure.)

CAUTION:

If you open and close the ring nut again after attaching

it, hold the worm housing securely with one hand on

the ller neck (23), otherwise the worm housing may

accidentally come loose.

10. Position the ller tray (22) so that the bed of the tray lies

above the arm (7).

Operation of the Meat Grinder

WARNING: Risk of injury!

• Once you turn on the appliance, the drive shaft of the

kneading machine starts rotating. Do not reach into the

rotating drive shaft during operation!

• Always mount the bowl for your safety.

• Always use the supplied pusher. Never put ngers or

tools into the ller neck!

CAUTION:

Never use the meat grinder with attached bowl! Cover the

drive shaft of the mixing drive with the safety cover (6).

11. Put the pieces of meat (meat paste / sausage mass or

dough) on the lling tray and into the ller neck.

12. Plug the power cord into a properly installed earthed

socket.

13. You can select a speed from level 4 to 8.

14. Stuff, if necessary, the meat respectively the dough with

the stuffer (21).

NOTE:

Short-term operation: Operate the appliance with the

meat grinder no longer than 10 minutes and allow the

appliance to cool down for 10 minutes.

Complete Operation

1. Turn the rotary knob anticlockwise until the display shows

“ ”.

2. Disconnect the power plug.

3. Disassemble all parts of the meat grinder.

4. Clean the parts used as described under “Cleaning”.

5. Cover the uptake for the spiral housing with the cover (15).

The Mixer

Application Instruction for the Mixer

WARNING: Risk of injury!

• The knife in the mixer is sharp! Handle the blades

of the mixer with the necessary care, especially when

emptying and cleaning the mixing bowl!

• Once you turn on the appliance, the drive shaft of the

kneading machine starts rotating. Do not reach into the

rotating drive shaft during operation!

• Always mount the bowl for your safety.

CAUTION:

• Never press the release button (10), if you have placed

the mixing bowl! The mixing bowl tilts.

• Do not operate the mixer without food!

• The glass could crack at high temperatures! Do not ll

in liquids over 60 °C.

• Do not overll the mixing bowl! Fill in a maximum of

1500 ml (fruit and liquid).

• Foam takes a lot of volume. Reduce the capacity for

liquids that foam vigorously.

• Cut the food into small pieces before operating the

appliance.

• Do not ll any hard ingredients such as nuts or coffee

beans into the mixing bowl.

• Objects like spoons or scrapers never may be in the

mixing vessel during operation.

NOTE:

The knives in the mixing vessel are also suited to crush

small amounts of pure ice. Remember, however, that the

operation may blunt the knife.

Recommendation:

If you want to prepare drinks with crushed ice, add the ice

cubes during mixing. The ice is crushed during mixing.

Place the mixing bowl on a stable level surface when lling it.

So you can better place the cover afterwards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic KM 3674 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Clatronic KM 3674 Manual

Product: