814179
63
Zoom out
Zoom in
Previous page
1/106
Next page
63
KM3674_IM 22.06.17
Preparation
Please refer to our overviews on page 3 and 4.
1. Assemble the bowl without tools.
2. Cover the uptake for the spiral housing with the cover
(15).
3. Fill in the crushed ingredients into the mixing bowl.
4. Press the lid rmly onto the mixing vessel. It has to snap
in audibly.
5. Press the lid rmly on the mixing bowl. Set the cap into
the lling opening and tighten it by turning it anticlockwise.
Operation of the Mixer
6. Make sure that the arm is lowered and locked.
7. Remove the safety cover (6) from the shaft drive of
the mixer motor. Press and slide the grooved surface
simultaneously.
8. Place the mixing bowl on the drive shaft of the mixing
engine. Set the mixing jug with the arrow over the dot
of the base unit. Turn the mixing jug clockwise up to
the stop. The two arrows and must be one above
the other.
9. Plug the power cord into an approved mains outlet.
10. Select a speed level.
NOTE:
Short-term operation: Operate the appliance no
longer than 2 minutes when mixing. Allow it to cool
down for 1 minute before using it again.
To rell ingredients, turn off the appliance. Remove
the lock by turning it clockwise and pulling it up. Con-
tinue operation only with the rell opening closed.
Complete Operation
1. Turn the rotary knob anticlockwise until the display shows
.
2. Disconnect the power plug.
3. Remove the mixing bowl.
4. Lift the lid before pouring out the contents. Place a nger
in the grip recess on the lid (2). Press the unlock button
(4) down and at the same time pull the lid up.
5. Clean the parts used as described under “Cleaning”.
6. Cover the drive shaft of the mixing engine with the safety
cover.
IMPORTANT NOTE:
Never keep citrus juices or acidic foods in metal bowls.
Cleaning
WARNING:
Always disconnect the power plug before cleaning.
Never immerse the appliance in water for cleaning. It could cause
an electric shock or re.
The knives in the mixing bowl and the meat grinder are sharp!
There is a risk of injury! Proceed carefully when disassembling,
cleaning and assembling the individual parts.
CAUTION:
Do not use wire brushes or other abrasive objects.
Do not use any sharp or abrasive cleaning agents.
Motor Housing
For cleaning of the housing, only use a damp cloth and mild
detergents.
Accessories of the Kneading Machine and the Meat
Grinder
CAUTION:
The components are not suitable for cleaning in the dish-
washer. Under the inuence of heat and strong detergents,
they could deform or discolour.
Components that have come into contact with food, can
be cleaned in soapy water.
Allow the parts to dry thoroughly before assembling the
appliance again.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic KM 3674 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic KM 3674 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info