169042

Clatronic ar 815 Manual

67
Zoom out
Zoom in
Previous page
1/90
Next page
ENGLISH
67
Operation
This chapter gives important operating instructions for the unit.
NOTE
If no button is pressed for 5 seconds or no setting is made,
►
then the unit returns to the previous mode. Changed settings
are saved.
On/Off
Press any button except
(8) and unlock button for front
panel (2) to turn the unit on. The display is activated.
Press
(1) to turn the unit off.
Settings
Volume
WARNING
Hearing damage due to high volume!
High volumes can permanently damage your hearing.
Set a moderate volu
► me.
Turn the multi control knob (3) to set the volume.
Sound Settings
Press the multi control knob (1). The current volume is dis-
played. Press again to cycle through the next setting options.
The following settings are possible:
VOL - volume (0 to 100)
BAS - bass (-10 to +10)
TRB - treble (-10 to +10)
BAL - Balance (sound distribution between left and right speak-
ers) (10L to 10R)
FAD - Fader (sound distribution between rear and front speak-
ers) (10F to 10R)
Turn the multi control knob to change the displayed setting.
Further Settings with the Multi Control Knob
Press and hold the multi control knob (1) to access further
setting options.
Turn the multi control knob to change the displayed setting.
The following settings are possible:
BEEP key tone:
BEEP 2ND
■ : The unit sounds a beep tone when
you press and hold a multifunctional button.
BEEP ALL
■ : The unit sounds a beep tone every
time you press a button.
BEEP OFF
■ : The unit sounds no beep tone.
AREA Region, when the unit is used, Europe (EUR) or USA.
NOTE
Changing this setting deletes all station
►
presets.
TA Trafc announcements
TA SEEK
■ : With activated TA function the unit
searches for a station with trafc announce-
ments.
TA ALARM
■ : No automatic station search. The
unit sounds a beep tone if no trafc information
is received and NO TP/TA is displayed. SEEK
PI is displayed if the selected station does not
transmit an RDS signal.
PI Moving into an area where two stations with identical
AF, but different Pl code (PI = program information)
are received destabilizes reception. In this situation
you have two options:
PI SOUND
■ : To change stations the other station
is played for less than one second.
PI MUTE
■ : The other station is muted.
RETUNE Delay for automatic search with trafc announcements
and/or program information:
S
■ (short) after approx. 30 seconds
L
■ (long) after approx. 90 seconds
MASK Setting to mask station during search:
DPI
■ : Alternative frequencies with different Pl
code are excluded from the search.
ALL
■ : Alternative frequencies with different Pl
code and no RDS information with high signal
level are excluded from the search.
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Clatronic ar 815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Clatronic ar 815 in the language / languages: English, German, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info