650695

Cisco Cisco SPA112 VoIP Manual

78
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 86
1
Call Feature Settings
Field Description
Blind Attn-Xfer
Enable
Enables the ATA to perform an attended transfer operation by
ending the current call leg and performing a blind transfer of the
other call leg. If this feature is disabled, the ATA performs an
attended transfer operation by referring the other call leg to the
current call leg while maintaining both call legs. To use this
feature, select yes. Otherwise, select no.
Default setting: no
MOH Server User ID or URL of the auto-answering streaming audio server.
When only a user ID is specified, the current or outbound proxy is
contacted. Music-on-hold is disabled if the MOH Server is not
specified.
Default setting: blank
Xfer When Hangup
Conf
Makes the ATA perform a transfer when a conference call has
ended. Select yes or no from the drop-down menu.
Default setting: yes
Conference Bridge
URL
This feature supports external conference bridging for n-way
conference calls (n>2), instead of mixing audio locally. To use this
feature, set this parameter to that of the server's name. For
example: conf@mysefver.com:12345 or conf (which uses the
Proxy value as the domain).
Default setting: blank
Conference Bridge
Ports
Select the maximum number of conference call participants. The
range is 3 to 10.
Default setting: 3
Enable IP Dialing Enable or disable IP dialing. If IP dialing is enabled, one can dial
[userid@] a.b.c.d[:port], where ‘@’, ‘.’, and ‘:’ are dialed by
entering *, user-id must be numeric (like a phone number) and a, b,
c, d must be between 0 and 255, and port must be larger than 255.
If port is not given, 5060 is used. Port and User-Id are optional. If
the user-id portion matches a pattern in the dial plan, then it is
interpreted as a regular phone number according to the dial plan.
The INVITE message, however, is still sent to the outbound proxy
if it is enabled.
Default setting: no
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info