650695
77
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 85
1
Restrict Source IP If configured, the ATA drops all packets sent to its SIP Ports from
an untrusted IP address. A source IP address is untrusted if it does
not match any of the IP addresses resolved from the configured
Proxy (or Outbound Proxy if Use Outbound Proxy is yes)
Default setting: no
Referor Bye Delay The number of seconds to wait before sending a BYE to the
referrer to terminate a stale call leg after a call transfer.)
Default setting: 4
Refer Target Bye
Delay
The number of seconds to wait before sending a BYE to the refer
target to terminate a stale call leg after a call transfer.)
Default setting: 0
Referee Bye Delay The number of seconds to wait before sending a BYE to the referee
to terminate a stale call leg after a call transfer.)
Default setting: 0
Refer-To Target
Contact
To contact the refer-to target, select yes. Otherwise, select no.
Default setting: no
Sticky 183 If this feature is enabled, the ATA ignores further 180 SIP
responses after receiving the first 183 SIP response for an
outbound INVITE. To enable this feature, select yes. Otherwise,
select no.
Default setting: no
Auth INVITE When enabled, authorization is required for initial incoming
INVITE requests from the SIP proxy.
Default setting: no
Reply 182 On Call
Waiting
When enabled, the ATA replies with a SIP182 response to the
caller if it is already in a call and the line is off-hook. To use this
feature select yes.
Default setting: no
Use Anonymous
With RPID
Determines whether or not the ATA uses “Anonymous” when
Remote Party ID is requested in the SIP message.
Default setting: yes
Use Local Addr In
From
Use the local ATA IP address in the SIP FROM message.
Default setting: no
Field Description
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info