650695

Cisco Cisco SPA112 VoIP Manual

80
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Line 1 and Line 2 Settings (PHONE 1 and PHONE 2)
Cisco SPA100 Series Administration Guide 88
1
Make Call Without
Reg
Allow making outbound calls without successful (dynamic)
registration by the unit. If No, dial tone will not play unless
registration is successful.
Default setting: no
Register Expires Expires value in sec in a REGISTER request. The ATA will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if the Register
parameter is no. Range:
0 – (2
31
– 1) sec.
Default setting: 3600
Ans Call Without
Reg
Allow answering inbound calls without successful (dynamic)
registration by the unit.
Default setting: no
Use DNS SRV Whether to use DNS SRV lookup for Proxy and Outbound Proxy.
Default setting: no
DNS SRV Auto
Prefix
If enabled, the ATA will automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a DNS
SRV lookup on that name.
Default setting: no
Proxy Fallback Intvl After failing over to a lower priority server, the ATA waits for the
specified Proxy Fallback Interval, in seconds, before retrying the
highest priority proxy (or outbound proxy) servers. This parameter
is useful only if the primary and backup proxy server list is
provided to the ATA via DNS SRV record lookup on the server
name. (Using multiple DNS A records per server name does not
allow the notion of priority, so all hosts will be considered at the
same priority and the ATA will not attempt to fall back after a
failover.)
Default setting: 3600
Proxy Redundancy
Method
The method that the ATA uses to create a list of proxies returned in
the DNS SRV records. If you select Normal, the list will contain
proxies ranked by weight and priority. If you select Based on SRV
port, the ATA also inspects the port number based on 1st proxy’s
port.
Default setting: Normal
Mailbox Subscribe
URL
The URL or IP address of the voicemail server.
Default setting: blank
Field Description
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info