650695
59
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Regional
Cisco SPA100 Series Administration Guide 67
1
Call ProgressTones
Field Description
Dial Tone Prompts the user to enter a phone number. Reorder Tone is played
automatically when Dial Tone or any of its alternatives times out.
Default setting: 350@-19,440@-19;10(*/0/1+2)
Second Dial Tone Alternative to the Dial Tone when the user dials a three-way call.
Default setting: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter an
external phone number, as opposed to an internal extension. It is
triggered by a comma character encountered in the dial plan.
Default setting: 420@-16;10(*/0/1)
Prompt Tone Prompts the user to enter a call forwarding phone number.
Default setting: 520@-19,620@-19;10(*/0/1+2)
Busy Tone Played when a 486 RSC is received for an outbound call.
Default setting: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone Played when an outbound call has failed, or after the far end hangs
up during an established call. Reorder Tone is played automatically
when Dial Tone or any of its alternatives times out.
Default setting: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning
Tone
Played when the caller has not properly placed the handset on the
cradle. Off Hook Warning Tone is played when the Reorder Tone
times out.
Default setting: 480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone Played during an outbound call when the far end is ringing.
Default setting: 440@-19,480@-19;*(2/4/1+2)
Ring Back 2 Tone Your ATA plays this ringback tone instead of Ring Back Tone if
the called party replies with a SIP 182 response without SDP to its
outbound INVITE request.
Default setting: the same as Ring Back Tone, except the cadence is
1s on and 1s off.
Default setting: 440@-19,480@-19;*(1/1/1+2)
Confirm Tone Brief tone to notify the user that the last input value has been
accepted.
Default setting: 600@-16;1(.25/.25/1)
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info