650695

Cisco Cisco SPA112 VoIP Manual

60
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
Regional
Cisco SPA100 Series Administration Guide 68
1
SIT1 Tone Alternative to the Reorder Tone played when an error occurs as a
caller makes an outbound call. The RSC to trigger this tone is
configurable on the SIP screen.
Default setting: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)
SIT2 Tone Alternative to the Reorder Tone played when an error occurs as a
caller makes an outbound call. The RSC to trigger this tone is
configurable on the SIP screen.
Default setting: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/
0/2,.380/0/3,0/4/0)
SIT3 Tone Alternative to the Reorder Tone played when an error occurs as a
caller makes an outbound call. The RSC to trigger this tone is
configurable on the SIP screen.
Default setting: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)
SIT4 Tone Alternative to the Reorder Tone played when an error occurs as a
caller makes an outbound call. The RSC to trigger this tone is
configurable on the SIP screen.
Default setting: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/
0/2,.380/0/3,0/4/0)
MWI Dial Tone Played instead of the Dial Tone when there are unheard messages
in the caller’s mailbox.
Default setting: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone Played when all calls are forwarded.
Default setting: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone Informs the local caller that the far end has placed the call on hold.
Default setting: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone Played to all parties when a three-way conference call is in
progress.
Default setting: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call
Indication Tone
Played when a call has been successfully switched to secure mode.
It should be played only for a short while (less than 30 seconds)
and at a reduced level (less than -19 dBm) so it does not interfere
with the conversation.
Default setting: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Field Description
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info