650695

Cisco Cisco SPA112 VoIP Manual

45
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
SIP
Cisco SPA100 Series Administration Guide 53
1
Response Status Code Handling
Reg Retry Intvl Interval to wait before the ATA retries registration after failing
during the last registration.
Default setting: 30
Reg Retry Long Intvl When registration fails with a SIP response code that does not
match Retry Reg RSC, the ATA waits for the specified length of
time before retrying. If this interval is 0, the ATA stops trying. This
value should be much larger than the Reg Retry Intvl value, which
should not be 0.
Default setting: 1200
Reg Retry Random
Delay
Random delay range (in seconds) to add to Register Retry Intvl
when retrying REGISTER after a failure.
Default setting: 0 (disabled)
Reg Retry Long
Random Delay
Random delay range (in seconds) to add to Register Retry Long
Intvl when retrying REGISTER after a failure.
Default setting: 0 (disabled)
Reg Retry Intvl Cap The maximum value to cap the exponential back-off retry delay
(which starts at Register Retry Intvl and doubles on every
REGISTER retry after a failure) In other words, the retry interval
is always at Register Retry Intvl seconds after a failure. If this
feature is enabled, Reg Retry Random Delay is added on top of the
exponential back-off adjusted delay value.
Default setting: 0, which disables the exponential backoff feature.
Field Description
SIT1 RSC SIP response status code for the appropriate Special Information
Tone (SIT) For example, if you set the SIT1 RSC to 404, when the
user makes a call and a failure code of 404 is returned, the SIT1
tone is played. Reorder or Busy tone is played by default for all
unsuccessful response status code for SIT 1 RSC through SIT 4
RSC.
Default setting: blank
SIT2 RSC SIP response status code to INVITE on which to play the SIT2
Tone.
Default setting: blank
Field Description
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info