650695
46
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
SIP
Cisco SPA100 Series Administration Guide 54
1
RTP Parameters
SIT3 RSC SIP response status code to INVITE on which to play the SIT3
Tone.
Default setting: blank
SIT4 RSC SIP response status code to INVITE on which to play the SIT4
Tone.
Default setting: blank
Try Backup RSC SIP response code that retries a backup server for the current
request.
Default setting: blank
Retry Reg RSC Interval to wait before the ATA retries registration after failing
during the last registration.
Default setting: blank
Field Description
RTP Port Min Minimum port number for RTP transmission and reception.
The RTP Port Min and RTP Port Max parameters should define a
range that contains at least 4 even number ports, such as 100 –106.
Default setting: 16384.
RTP Port Max Maximum port number for RTP transmission and reception.
Default setting: 16482.
RTP Packet Size Packet size in seconds, which can range from 0.01 to 0.16. Valid
values must be a multiple of 0.01 seconds.
Default setting: 0.030
RTP Tx Packet Size
Follows Remote SDP
Enable the Remote pair RTP Packet Size.
Default setting: Yes
Max RTP ICMP Err Number of successive ICMP errors allowed when transmitting
RTP packets to the peer before the ATA terminates the call. If
value is set to 0, the ATA ignores the limit on ICMP errors.
Default setting: 0
Field Description
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info