650695
43
Zoom out
Zoom in
Previous page
1/136
Next page
Configuring the Voice Settings
SIP
Cisco SPA100 Series Administration Guide 51
1
SIP Timer Values
Mark all AVT
Packets
Select yes if you want all AVT tone packets (encoded for
redundancy) to have the marker bit set for each DTMF event.
Select no to have the marker bit set only for the first packet.
Default setting: yes
AVT Packet Size Indicates the AVT Packet size according to value set in ptime or
fixed 10ms.
Default setting: ptime
SIP TCP Port Min The lowest TCP port number that can be used for SIP sessions.
Default setting: 5060
SIP TCP Port Max The highest TCP port number that can be used for SIP sessions.
Default setting: 5080
CTI Enable Enables or disables the Computer Telephone Interface feature
provided by some servers.
Default setting: no
Keep Referee When
REFER Failed
Set this parameter to yes to configure the phone to
immediately handle NOTIFY sipfrag messages.
You can also configure this parameter in the configuration
file:
<Keep_Referee_When_REFER_Failed ua="na">Yes
</Keep_Referee_When_REFER_Failed>
Caller ID Header Provides the option to take the caller ID from PAID-RPID-FROM,
P-ASSERTEDIDENTITY, REMOTE-PARTY-ID, or FROM
header.
Default setting: PAID-RPID-FROM
Field Description
SIP T1 RFC 3261 T1 value (round-trip time estimate), which can range
from 0 to 64 seconds.
Default setting: 0.5
Field Description
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cisco Cisco SPA112 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cisco Cisco SPA112 VoIP in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info