•The built-in computer measures the level of charge of the batteries and generates a signal when the value becomes critical by causing both
the red and green lights to illuminate when the door is opened (rather than only the green led that illuminates when the batteries
are OK).
•From the time that the warning signal first appears you can open and close the safe about 50 times before the batteries are completely
flat.
•At this point it is
essential
to change the batteries.
ELECTRONIC COMPONENTS:
•The electronic components of the safe are selected for their high reliability. However, it is important to avoid contact with water, plaster,
cement, etc. or they could suffer irreparable damage.
CHANGING THE BATTERIES:
•Replace all the batteries (four 1.5 V alkaline batteries) at the same time to ensure correct operation. The personal code will remain stored
in the memory even when the batteries have been removed so there is no need to reprogram it after the batteries have been changed.
•When you have installed the new batteries lock and unlock the safe several times with the door open to check that the batteries are
properly connected.
EXTERNAL POWER SUPPLY:
•If you need to connect the safe to an external power supply, exclusively use the lead supplied with the safe and connect it to
a 9V alkaline battery.Remove the plastic plug covering the socket at the top right hand part of the keypad and connect the cable. Using
other types of external power supply can cause serious damage to the built-in computer.
FAULT FINDING
The products described above have all the characteristics illustrated in the technical data in CISA S.p.A. catalogues and they are designed exclusively for the uses
described therein. CISA S.p.A. does not guarantee any operational features or technical characteristics unless they are expressly indicated. For special security
requirements Clients are requested to consult their dealer or installer or contact CISA directly for specific advice on the most suitable model for individual needs.
COSA FARE
FAULT
1.KEYPAD FAILS TO EMIT ACOUSTIC SIGNAL WHEN KEYS
ARE PRESSED.
2.WHEN UNLOCKING THE SAFE THE GREEN LED
ILLUMINATES BUT THE KNOB WILL NOT TURN .
3.THE SAFE FAILS TO STORE YOUR PERSONAL CODE
NUMBER.
4.THE GREEN AND RED LEDS ILLUMINATE TOGETHER
.
•Check power supply.
•Check that the battery holder is connected.
•Check battery polarity (the correct position is indicated inside the
battery compartment).
•If the first attempts are unsuccessful, connect to an external power
supply, using the supplied lead and a new 9V battery, then check
that the keypad is working correctly.
•Make sure that the door is not being forced outward by the contents
of the safe.
•Connect to an external power supply with new batteries before
trying to open the safe.
•Check the battery connection and polarity.
•Check that you are following the procedure described on the
instruction sheet.
•Note that in order to store a personal code number it must be ped
twice in succession, the first time to set the code, the second time
as a confirm (see instructions).
•If the problem persists check the batteries and renew them if
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Cisa Vision at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Cisa Vision in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 0.7 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
