585818
22
Zoom out
Zoom in
Previous page
1/48
Next page
22
Step 5:
Installation of leg curler (4), leg foams (43) and arm curl pad (81).
1. Put the leg curler (4) into the holder of leg curl frame (7) and secure
with bolt M12x85 (47), washer 12//24 (66) and nylon nut M12 (63).
(Note: Don’t tighten the screw for leg curler too much. The leg curler
should turn easy after assembly.)
2. Insert the leg foam holder (41) into the leg curler (4) and seat
support (7) and put the leg foams (43) onto the ends of leg foam
holder (41).
3. Adjust the arm curl pad (81) onto arm curl holder (80) so that the
threaded holes in the rear of arm curl pad (81) are align with the
arm curl holder (80) and screw it tightly by using hex screws M8x16
(59) and washers 8//16 (68).
4. Slide the leg curl holder (80) into the appropriate holder of leg
curl frame (7) and secure it into desired position by using the quick
lock knob (24). (Note: Same procedure as quick lock knob for seat
support.)
5. Cover the screw head of screw (47) and nut (63) with
corresponding screw cap (73).
Step 6:
Installation of butterfly arm support (6), pulley support (8) and
pulley holder (27).
1. Place the butterfly arm holder (6) at appropriate position of top
frame (11), push axle (77) through all holes and secure with nylon
nuts M12 (63) and washer 12/24 (66).
2. Assemble the hand grip nut with screw (29) to the main frame
(34) and secure with bolt M8x45 (56), washer 8//16 (68) and nylon
nut M8 (65).
3. Place the pulley support (8) to the main frame (34) and screw it
on bottom area tightly with hex bolt M10x65 (53), curved washer
10//25 (71) and nylon nut M10 (64) and on top only with screw (53)
and washer (71).
4. Insert the pulley holder (27) into the pulley support (8) and secure
with bolt M12x85 (47), washer 12/24 (66) and nylon nut M12 (63).
5. Cover all screw heads of screws (47+53+56) and nuts (63+64+65)
with corresponding screw caps (73+74+75).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit SP 20 XL Fitness Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit SP 20 XL Fitness Station in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info