585818
23
Zoom out
Zoom in
Previous page
1/48
Next page
23
English
Step 7:
Installation of butterfly arm left and right (9L+9R), hand grip
(21) and arm foam (42).
1. Put the left and right butterfly arms (9L/R) into the Butterfly arm
support (6) and secure with bolt M10x90 (78), washer 10//20 (67) and
nylon nut M10 (64). Insert the locking pins (23) to secure butterfly
arm position and cover the nuts (64) with screw cap (74).
2. Slide the arm foams (42) onto the butterfly arms left and right
(9L+9R) (perhaps by help of a little bit soap water) and tighten hand
grips (21) at butterfly arms (9L/R) with screws M8x25 (59), screws
M8x16 (58) and curved washer 8//25 (72).
Note:
For bench press exercising secure the butterfly arms left and right
(9L+9R) with locking pins (23) at butterfly arm support (6) and screw
loosely and fold back the handgrip nut (29). For butterfly exercising
secure position of butterfly arm support (6) with hand grip nut (29)
und take out the locking pins (23) from butterfly arms (9L+9R).If no
use of locking pins you can storage at main frame (34) as figure
A shows.
Step 8:
Installation of cable 1 for butterfly (38) with pulleys (19).
(Note: The assembling of cables needs a simultaneously
assembling of pulleys. So please insert the cable each time
before you assemble a pulley and don’t tighten the screws for
pulleys too much. The pulley should turn easy after assembly.)
1. Screw one end of the cable 1 (38) at the holder of the butterfly
arm left (9L) with bolt M10x35 (51), washer 10//20 (67) and nylon
nut M10 (64).
2. Attach one pulley (19) with cable 1 (38) and pulley covers (20)
into 1st pulley holder (27) and secure with hex bolt M10x50 (50),
washer 10//20 (67) and nylon nut M10 (64).
3. Attach one pulley (19) with cable 1 (38) and pulley covers (20) into
twisted pulley holder (26) and secure with hex bolt M10x50 (50),
washer 10//20 (67) and nylon nut M10 (64).
4. Attach one pulley (19) with cable 1 (38) and pulley covers (20)
into 2nd pulley holder (27) and secure with Hex bolt M10x50 (50),
washer 10//20 (67) and nylon nut M10 (64).
5. Screw the other end of the cable 1 (38) at the holder of the
butterfly arm right (9R) with bolt M10x35 (51), washer 10//20 (67)
and nylon nut M10 (64).
6. Cover all screw heads of screws (50+51) and nuts (64) with
corresponding screw caps (74).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit SP 20 XL Fitness Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit SP 20 XL Fitness Station in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info