517230
25
Zoom out
Zoom in
Previous page
1/64
Next page
25
English
Step 16:
Installation of cable 4 for leg curler (31) with cable pulley
units.
1. Pull cable 4 (31) through the big hole of leg curler (15) and
connect the end of cable 4 (31) at appropriate holder on
bottom side of leg curler holder (12) by using screw M10x25
(109), washer 10//20 (118) and self locking nut M10 (124) as
showed in fi gure „C“.
2. Take cable 4 (31) and a cable pulley unit as showed in
gure „B“ with screw M10x80 (114), washer 10//20 (118),
plastic bushing for pulley (95) and nut M10 (124). Insert the
cable pulley (83) with cable pulley cover (84) into the leg
curler (15) and position the plastic bushing (95) from outer
side of leg curler (15).
3. Put a cable roller unit as fi gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 4 (31) and connect this at cable pulley holder
1(8) in a way that the cable pulley can roll easy.
Step 15:
Installation of cable 3 for butterfl y (29) with cable pulley
units.
1. Connect the both ends of cable 3 (29) with the appropriate
holder at butterfl y arm left and right (11+14).
2. Put two cable roller units as fi gure „A“ shows together
with screw M10x45 (110), washer (118) and self locking nut
(124), insert the cable 3 (29) and connect them at cable pulley
holders 1 (8) in a way that the cable pulley can roll easy.
3. Put a cable roller unit as fi gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 3 (29) and connect this at twin cable pulley
holder (27) in a way that the cable pulley can roll easy.
Step 17:
Installation of cable 2 (28) with cable pulley units.
1. Pull cable 2 (28) through the big hole of support 2 (7) and
connect the end of cable 2 (28) at cable pulley holder 2 (6)
by using screw M10x25 (109), washer 10//20 (118) and self
locking nut M10 (124) as showed in fi gure „B“.
2. Put two cable roller unit as fi gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 2 (28) and install these units at holder of front
foot (1) in a way that the cable pulley can roll easy.
3. Put a cable roller unit as fi gure „A“ shows together with
screw M10x45 (110), washer (118) and self locking nut (124),
insert the cable 2 (28) and connect this at twin cable pulley
holder (27) in a way that the cable pulley can roll easy.
4. Take cable 2 (28) and enlarge it with 8 links chain (53) and
two carbine hooks (55) and connect cable 2 (28) with cable
pulley holder 2 (6), which is pre-assembled at cable 1 (26).
(Note: To get a smooth sliding cable system, you may adjust
the cable system at 8 links chain (53) with carbine hooks (55)
through setting them into another position.)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Profi-Center - 99881 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Profi-Center - 99881 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Christopeit Profi-Center - 99881

Christopeit Profi-Center - 99881 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info