517230

Christopeit Profi-Center - 99881 Manual

22
Zoom out
Zoom in
Previous page
1/64
Next page
22
Step 7:
Installation of butterfl y arms (11+14) at butterfl y arm
holder (9) and foam rubber roll (63) and hand grips (19).
1. Put the butterfl y shafts (45) into the holder of butterfl y arm
left and right (11+14) and place the butterfl y arms (11+14) in
right position into the appropriate holder of butterfl y holder
(9).
2. Screw the butterfl y arms (11+14) at butterfl y arm holder (9)
tightly by using screw M10x20 (108), spring washer for M10
(122) and washer 10//20 (118) on bottom and top side.
3. Slide the foam rubber roll (63) with help of a little bit soap
water onto the butterfl y arms (11+14).
4. Place the hand grips (19) into appropriate holder of butterfl y
arm left and right (11+14) and screw them tightly by using
screw M8x30 (102), washer 8//16 (117) and spring washer
for M8 (123).
5. For bench press exercising secure the butterfl y arms left
and right (11+14) with locking pins (49) at butterfl y holder
(9) and screw out the handgrip bolt 2 (70) of bench press
support (9).
6. For butterfl y exercising secure the butterfl y arm holder (9)
with hand grip bolt 2 (70) at bench press support (38) und
take out the locking pins (49) from butterfl y arms (11+14).
Step 8:
Installation of the back pad (60) and leg curler holder (12)
at support 2 (7).
1. Adjust the back pad (60) on support 2 (15) so that the
threaded holes in the rear of the back pad (60) are align with
the holes in support 2 (7) and screw it tightly by using screw
M8 x 70 (107), spring washer for M 8 (123) and washer 8//16
(117).
2. Place the leg curler holder (12) in appropriate position at
support 2 (7), so that the holes are align and screw it tightly
by using screw M10x70 (112), adjusting plate (48), washers
10//20 (118) and self locking nut M 10 (124).
Step 9:
Installation of seat pad (17) and round pad holder (18) at
seat support frame (13).
1. Adjust the seat pad (17) on seat support frame (13) so
that the threaded holes in the rear of seat pad (17) are align
with the seat support frame (13) and screw it tightly by using
screw M8 x 45 (104), spring washer for M 8 (123) and washer
8//16 (117).
2. Slide the round pad holder (18) into the seat support frame
(13) in middle position.
3. Slide two black foam rubber roll (64) onto the ends of
round pad holder (18).
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit Profi-Center - 99881 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit Profi-Center - 99881 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Christopeit Profi-Center - 99881

Christopeit Profi-Center - 99881 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info