Manual Christopeit LB2 - 1142 (page 24 of 68) (English, German, Dutch, French)

644079

Zoom out

Zoom in

1/68

Maintenance and adjusting

1. Lubrication for the running belt:

In order to keep the machine in the best condition, please add

some Silicone oil between the running belt and the running board

after 50 hours or 1 to 2 month of use. But the running belt may

slip, if you lubricate too much. To lubricate the belt please pull

the walking belt up and injection the silicone oil into the gap

between belt and walking deck.

2. Adjusting running belt:

You need to adjust the walking belt to the normal position, per

the following steps if it is off.

1. Set speed at 3-5km.

2. Using the Allen key to adjust the belt tension bolt on the end

cap of the system frame.

3. If you want to move the belt towards left, turn the right tension

bolt clockwise.

4. If you want to move the belt towards right, turn the left tension

bolt clockwise.

5. If you have already done according to the steps above and

it is still not at the good range, then the running belt should be

damaged already, please contact your local dealer for replace-

ment.

3. No light on the Display:

1. Check if the power plug is properly connected.

2. Check if the safety key on the computer is in place.

3. Check if the wire in the right post is properly connected.

4. Check the fuse and put in again if necessary.

Remind ! Before you inspect any wire or electrician part, ple-

ase ensure that the Power supply has been turned off.

4. Running belt slips:

1. Make sure the walking belt is not too loose.

2. Make sure the motor belt is not too loose.

5. Abnormal noise from the machine

1. Check if any screw of machine is loose.

2. Check if the motor belt is off.

3. Check if the running belt is off.

Note:

Please contact your local dealer if you have checked all the

above listed things but the problem is still there.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit LB2 - 1142 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit LB2 - 1142 Manual

Product: