793036
22
Zoom out
Zoom in
Previous page
1/68
Next page
22
Step 4:
Installation of the footrests (23) at footrest holder (31).
1. Push the right footrest (23R) onto the right footrest holder (31R). Adjust
the holes in the parts so that they are aligned.
2. Push the carriage bolts M6x50 (22) from above through the holes. Push
on a washer 6//14 (77) from the opposite side, screw on a handgrip nut
(53) and tighten firmly.
3. Install the left footrest (23L) on the left footrest holder (31L) as described
in 1. 2. (Note: The position adjusted in this way should always be equal
at both sides. The right and left footrests (23) can be discerned by the
edges of the longitudinal sides of the footrests. The high edges of the
footrests (23) must point inwards (towards the main frame.) The positions
can change as desired at all times by removing the carriage bolts (22)
and sliding the footrests on the footrest brackets to get a comfortable
exercise position close to the hand grip.)
Step 3:
Installation of the footrest holder (31) and connecting tubes (38)
to the pedal crank (1) and support (49).
1. Push the grip axle (58) into the middle position at handlebar support (49)
and put one wave washer (54) and then both connecting tubes (38) onto
the axles’ end (58). Put on the screws M8x20 (14), a spring washer for
M8 (8) and a washer 8//38 (36) and tighten it firmly.
2. Put one wave washer (52) and the right footrest holder (31R) with pedal
tube bracket (19) at the pedal crank (11) and tighten them with washer
8//25 (15), spring washer for M8 (8) and screw M8x20 (14) firmly.
3. Push the footrest holder (31R) at the connecting tube (38) and adjust the
holes in the tubes so that they are aligned. (Note: Right is specified as
viewed standing on the machine during training.)
4. Push the hex bolt M8x75 (29) through the holes and tighten the footrest
holder (31R) at connection tube (38) with washers 8//16 (25) and nut M8
(21) firmly. (This connection point has to move easily. So please don’t
tighten the screw too much.)
5. Install the left footrest holder (31L) incl. all additionally required parts on
the left hand side of the machine as described in 2. – 4.
6. Now turn the construction by hand 3-4 times and tighten the screws (14)
of support (49) as mentioned in Step 2 firmly.
7. Put the handlebar tube cover (57) into right position.
8. Push the screw caps M10 (17) onto the screw head of screw 18) and
nuts (21).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit EL 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit EL 5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info