Manual Christopeit CXT 7200 (page 23 of 32) (English, German)

793034

Zoom out

Zoom in

1/32



Aer power-up, press “SCHNELLSTART” program -key to enter Quick

Start -Program. Start pedaling to begin workout at this me. Press “+”

or “–“ -key to adjust resistance load during workout.



Seng Parameters for Manual

Selecng “MANUELLES PROGRAMM” -key, then pressing “F”-key. 1st

parameter “Time” (Zeit) will ash so value can be adjusted by using“+”

or “–“ -key. Press “F”-key to save value & move to next parameter to

be adjusted. Connue through all desired parameters, start pedaling to

start workout. “+” or “–“ -key adjusts resistance load during workout.



INDIVIDUAL program allows user to create their own program that can

be used immediately and on subsequent workouts.



Selecng INDIVIDUAL PROGRAMM with -key, press “F”-key to select

“INDIVIDUAL” mode. The text window will display” Select Prole” 4 se-

conds , meanwhile Segment 1 will ash. Adjust “+” or “–“-key to set

desired resistance load (1-32). Press “F”- key to move to next segment,

connue for all 10 segments.



Aer that 1st parameter “ZEIT” (Time) will ash so value can be adjus-

ted using “+” or “–“ - key. Press “F”-key to save value & move to next

parameter to be adjusted. Connue through all desired parameters,

start pedaling to begin workout. The resistance could not be adjusted

by “+” or “–“ –key during workout.  The nal 10 segments prole

will be saved for future workouts.



Selecng ”INTERVALL PROGRAMM” (Interval) with key then pres-

sing “F”- key. The text window will display “SELECT LEVEL” 3 seconds.

There are 3 levels (L1, L2, L3) to select, using “+” or “–“ -key then pres-

sing “F”- key to conrm.



Aer that 1st parameter “Time” will ash so value can be adjusted

using “+” or “–“ -key. Press “F”-key to save value & move to next para-

meter to be adjusted. Connue through all desired parameters, start

pedaling to start workout. The resistance could not be adjusted by “+”

or “–“ -key during workout.



Selecng “WATT” PROGRAMM with key, then pressing “F”-key. The

text window will display “SELECT WATT” 3 seconds. Meanwhile “100”

will ash. Selecng WATT value from 100W to use “+” or “–“ -key then

pressing “F”-key to conrm.



Aer that 1st parameter “Time” will ash so value can be adjusted

using “+” or “–“ -key. Press “F”-key to save value & move to next para-

meter to be adjusted. Connue through all desired parameters. Start

Pedaling to start Workout, “+” or “–“ -key adjusts WATT value during

workout.



Selecng “ZIELPULS PROGRAM” (HRC) with key. Press “F”-key and dis-

play show HRC 1 = 55% pulse program. You can choose with “+” or “–“

-key one of the other pulse programs HRC 2 = 75%, HRC 3=90%, HRC

4=100%. The target pulse are calculate based on age of user data you

entered at respecve user prole U0-U3.



Aer chosen pulse program 1st parameter “ZEIT” (Time) will ash so

value can be adjusted using “+” or “–“ -key. Press “F”- key to save value

& move to next parameter to be adjusted. Connue through all desired

parameters. Last parameter is set target pulse, which you can opmize

by using “+” or “–“ -key if the calculated value don’t ts. Then start pe-

daling to start workout. If pulse is above or below the set target pulse,

computer adjust the resistance load automacally. It will check every

10 seconds approx. 1 level will increase or decrease (Note: each bar

represents 2 level of loading) User can not adjust resistance load, using

“+” or “–“ -key during the workout.





Selecng “TEST” Program with key then pressing “F”-key. The display

will show out average speed, total Distance, total Kilojoules and ave-

rage Pulse of last workout for 4 seconds. Aer that, the text window

will display “SELECT WATT” 3 seconds, meanwhile “100” will ash. Se-

lecng WATT value from 100W, using “+” or “– “ -key then pressing “F”-

key to conrm. Start Pedaling to start Workout, Time display will show

12:00, it cannot change. Aer 12 minutes, will display Average Speed,

Total Distance, Total Kilojoules and Average Pulse,



Selecng “BERG” Program (Mountain) with key then pressing “F”-key.

The text window will display “SELECT LEVEL” 3 seconds. There are 3 le-

vels (L1, L2, L3) to select, using “+” or “–“ -key then pressing “F”-key to

conrm.



Aer that 1st parameter “TIME” (Zeit) will ash so value can be adjus-

ted using “+” or “–“ -key. Press “F”-key to save value & move to next

parameter to adjust. Connue through all desired parameters, start pe-

daling to begin workout. The resistance could not be adjusted by “+” or

“– “ –key during workout.



Selecng “BMI-BMR-FAT” Program with key. Then press “F”- key to

start measurement, please also grip hand pulse grips for 10seconds.

Aer measurement, the display will show out Body Fat %, BMI and

BMR. Body Fat % and BMI will switch display to another in every 4 se-

conds) If you don’t grip the hand pulse sensors Display will show “Err”.

(The results were calculated based on personally data you entered in

you chosen user prole U0-U3.)

 BMI (Body Mass Index): BMI is a measure of body fat based on height

and weight that applies to both adult men and women.

BMR (Basal Metabolic Rate): Your Basal Metabolic Rate (BMR) shows

the number of calories (1 Calorie = 4,186 Joule) your body needs to

operate. This does not account for any acvity, it is simply the energy

needed to sustain a heartbeat, breathing and normal body temperatu-

re. It measures the body at rest, not sleep, at room temperature.



Input: AC100-240V~50/60Hz 1,5A max

Output: DC30V/2A

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CXT 7200 in the language / languages: English, German as an attachment in your email.

The manual is 4.3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Christopeit CXT 7200 Manual

Product: