793034
19
Zoom out
Zoom in
Previous page
1/32
Next page
19
GB

      

 Push the axle (11) into the middle posion at
handlebar support (8) and put on lehand side one
wave washer 17//25 (10) and the hand grip le (13)
onto the axles’ end (11). (Note: Right and le are
specied as viewed standing on the machine during
training. The handgrip bars must be posioned aer
assembly, so that the upper ends are curved outwards
(away from the support (8)). For assembly adjust the
handgrips downwards). Put on the screw M8x16 (15)
a washer 8//22 (14) and ghten it rmly.
Install the right handgrip (19) incl. all addionally
required parts on the right hand side of the machine
as described in 1. To ghten the screws (15) rmly use
both tools (114) at the same me.
 Push the connecng tubes (34) into the handgrips
(13+19) and adjust the holes in the tubes so that
they are aligned. Put onto the bolts M8x16 (32) one
spring washer (27) and curved washer 8//19 (33) and
ghten the handgrip bars (13+19) at connecon tubes
(34) rmly.
 Put the pulse cables (25) at pulse connecon (30) at
front side of support (8).



Put the footrest (104) onto the le footrest holder
(103). Adjust the holes in the parts so that they are
aligned. (Note: The high edges of the footrests (104)
must point inwards (towards the main frame. The
posion adjusted in this way should always be equal
at both sides. The posions can change as desired at
all mes by removing the carriage bolts (106) and sli-
ding the footrests on the footrest brackets to get a
more or less at movement.)
 Push the carriage bolts M6x50 (106) from above
with washer for pedal (105) through the holes. The
hole of washer for pedal (105) need posion more
close to main frame. Put on a washer 6//13 (108) and
a spring washer for M6 (109) from the opposite side
and ghten rmly with handgrip nut (107).
 Install the footrest (104) on right hand side on
footrest holder (100) as described in 1. – 2.
 Install the connecng tube cover le and right
(66+67) at intended posion in front of footrest
holder le and right (100+103) and secure with
screws M5x12 (5).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit CXT 7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CXT 7200 in the language / languages: English, German as an attachment in your email.

The manual is 4.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info