793027
19
Zoom out
Zoom in
Previous page
1/24
Next page
19
GB

Use only a less wet cloth for cleaning.  Never use benzene, thinner or other aggressive cleaning agents for surface cleaning as this dam-
age caused. The device is only for private home use and for use suitable indoors. Keep the unit clean and moisture from the device.

Remove the baeries from the computer while intending the unit for more than 4 weeks not to use. Choose a dry storage in-house and put some
spray oil at front & rear foot tube connecon point and hand grip axle. Also to the thread of the mounng screws for handle and seat tube. Cover
the bike to protect it from being discolor by any sunlight and dirty through dust.

We recommend every 50 hours to review the screw connecons for ghtness, which were prepared in the assembly. Every 100 operang hours,
you should put some spray oil at front & rear foot tube connecon point and hand grip axle.

Training area in mm
(for home trainer and user) Free area in mm
(Training area and security area
(rotang 60cm))
If you cannot solve the problem with the following informaon, please contact the authorized service center.

  
Computer is not counng data
and do not switch on aer start
cycling.
Sensor impulse missing base on not well
plugged connecon. Check the plug connecons at computer and inside of handle-
bar support.
Computer is not counng data
and do not switch on aer start
cycling.
Sensor impulse missing base on not cor-
rect posion of sensor. Take o the cover and check the distance between magnet and
Sensor. The magnet at turning belt wheel should have only less
than < 5mm distance against the sensor posion.
No pulse value. Pulse cable is not plugged in. Check the separately pulse cable is well connected with compu-
ter. Check the connecons of the pulse cable.
No pulse value. Pulse sensors not well connected. Screw out the screw for pulse measurement and check if plugs
are well connected and no damage at pulse cable.
Resistance don’t change Connecon of resistance not well Check the resistance connecon inside of handlebar support as
manual menon.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Christopeit CRT 7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Christopeit CRT 7100 in the language / languages: English, German as an attachment in your email.

The manual is 2.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info