767822
18
Zoom out
Zoom in
Previous page
1/60
Next page
18 19
N2 C
IMPORTANT- RETAIN FOR FUTURE REF-
ERENCE - READ CAREFULLY.
WARNING: BEFORE USE, REMOVE AND
DISPOSE OF ALL PLASTIC BAGS AND
PACKAGING MATERIALS AND KEEP THEM
OUT OF REACH OF CHILDREN.
· WARNING: This product is intended
for use for babies aged between 0 and 6
months, weighing up to a maximum of 9
kg .
· WARNING: When a child is able to sit,
kneel or to pull itself up, the crib shall not
be used anymore for this child.
· WARNING: Do not use the product if any
part is broken, torn or missing.
· WARNING: Be aware of the risk of open
fires and other sources of strong heat,
such as electric bar fires, gas fires, etc.
· Before assembly, check that the product
and all of its components have not been
damaged during transportation. Should
any part be damaged do not use and keep
out of reach of children.
· Make sure the users of this product are
knowledgeable on its proper operation.
· WARNING: the product is ready for use
only when all locking mechanisms are en-
gaged. Check carefully that these are en-
gaged before use.
· WARNING: When the child is left unat-
tended in the product, in ‘’crib mode’’, al-
ways make sure that the side rail is raised
and the zippers are completely closed.
· When the product is being used especially
in ‘’crib mode’’, the wheels must be always
locked.
· All opening, adjusting, anchoring and posi-
tioning operations of the product must be
carried out exclusively by an adult.
· Before use in ‘’Co-sleeping mode’’ (Fixed
to the bed)’’ make sure the product is
properly anchored and positioned.
· WARNING: When the product is used in
‘’Co-sleeping mode’’ (Fixed to the bed)’’,
before laying the child in it, make sure
that the connection belts are hooked and
tensioned properly, the product must be
secured to the parents’ mattress and no
gaps between the products and the adults’
mattress must be present.
· The product must always be placed on a
horizontal surface. Never leave the prod-
uct on an inclined surface with the child
inside of it.
· Children must not be permitted to play
without supervision near the product.
· Do not use the product without the frame.
· Keep the fastening belts away from the
reach of children.
· The thickness of the mattress must be
such that the vertical height (upper sur-
face of the mattress until the upper edge
of the product’s sides) is at least 200 mm.
Do not use more than one mattress in the
crib.
· If you purchase a mattress separately,
make sure it is suitable for the product.
· The reference mark on the product’s inte-
rior indicates the maximum thickness of
the mattress that shall be used.
· Do not leave any object inside the product
that could reduce its depth.
· Do not position the cot near walls and ob-
stacles to prevent trapping hazards.
· Do not leave small objects inside the prod-
uct to prevent chocking hazards.
· Use only spare parts approved by the
manufacturer. Do not apply accessories to
the product, which are not supplied by the
manufacturer.
· Do not adjust the product with the child
inside.
· Do not move the product with the child
inside.
· Do not use the product with more than
one child at a time.
· The product must be kept away from elec-
tric cables and cords: do not place the
product near windows where cords, cur-
tains or similar objects could pose chock-
EN ing or strangling hazards for the child.
To avoid strangling hazards, do not give
to your child or place near him, objects
equipped with cords.
· A prolonged exposure to the sun may
cause changes of tones to the products
colour. After a prolonged exposure of the
product to high temperatures, wait a few
minutes prior to placing your child in it.
· When not in use, keep the product away
from the reach of children.
· All assembly fittings should always be
tightened properly and that care should
be taken that no screws are loose, be-
cause a child could trap parts of the body
or clothing (e.g. strings, necklaces, ribbons
for babies’ dummies, etc.), which would
pose a risk of strangulation.
COMPONENTS
A. Support leg with wheels
B. Support leg with non-slip feet
C. Central supporting structure
D. Fixing belts
E. Fabric lining
F. Mattress with removable cover
G. Upper tubular structure
H. Upper removable tubular structure
I. Bag
A1) Height adjuster button
A2) Removable structure support
A3) Height indicator
A4) Feet rotation release button
A5) Adjustable feet
A6) Wheels with brake
B1) Non-slip feet
B2) Structure fixing for central support
C1) Fixing pin
C2) Fabric lining fixing button
C3) Grey fixing buckles
D1) Red anchoring buckles
E1) Belt with clip
E2) Pocket
E3) Zip for fabric removal
E4) Zip for co-sleeping opening
E5) Mesh window
E6) Side support for restraint
G1) Leg fixing
H1) Removable tubular structure release button
L) Maximum limit for mattress height
ASSEMBLY OF THE CRIB
1. Hold the support leg making sure that the external tube slides
upwards until you hear the locking CLICK in the first position
(fig. 1). Repeat the same operation with the other support leg.
2. Fix the central supporting structure to the 2 legs as illustrated
in figure 2. The CLICK of the pivot indicates correct fixing of the
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chicco Next 2 Me at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chicco Next 2 Me in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info