Manual Chamberlain 1703 (page 29 of 60) (English, German, Dutch, French, Italian, Portuguese, Spanish)

555395

Zoom out

Zoom in

1/60

Representative Locking Mechanism

To prevent damage to garage door and operator: Ensure that turning the outside handle will not actuate ANY of the locking mechanisms

supplied with the door.

PICTURE 3

1. Spring

2. Latch

3. Door Plate

4. Canopy Door

5. Inside of Canopy Door

6. Remove inside Door

Handle

PICTURE 4

• Remove all door latching mechanisms (Figure 3),

and secure any locking bars in the open position.

• Remove inside door handle but leave the barrel in

place in door (Figure 4).

• Ensure that turning the outside handle will not

actuate ANY of locking mechanism supplied with the

door. Failure to do so will result in serious damage to

your door and operator. This is not covered by the

Manufacturer’s Warranty.

Door Conditions

Check if additional profiles are needed. Adjust length if necessary.

Possible overall length with additional profiles: 117cm or 122cm or 127cm or 132 cm.

Doorarm and profiles must be tightened properly to the framework.

1. Canopy Door

2. Door Arm

3. Cross Bracing

4. Profiles

Note:

The door arm should extend about 13mm (1/2”) over the top of the door. If not, check hole positions.

The garage door may require additional bracing to provide suitable support.

To prevent damage to garage door, do NOT drill through the entire door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain 1703 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chamberlain 1703 Manual

Product: