Manual Chamberlain 1703 (page 31 of 60) (English, German, Dutch, French, Italian, Portuguese, Spanish)

555395

Zoom out

Zoom in

1/60

Standard Assembly (Door mounted inwards)

Release the trolley and slide the connection arm into the

slot of the door arm.

Do not move the door arm. Leave in upright position.

1. Trolley

2. Connection Arm

3. Canopy Door Arm

4. Shipping cable tie

5. Screw 5/16” - 18 x 7/8”

6. Nut

PICTURE 14

PICTURE 15

1. Trolley

2. Connection Arm

3. Canopy Door Arm

Garage door with inward protruding lintel

1. To install the Chamberlain Door Arm at inward protruding lintel situations the door

arm must be mounted in a different way.

2. Cut down the door arm supplied with your garage door operner (275mm).

3. Mount the cut down door arm to the trolley as shown. Do not use the slotted arm supplied with the Chamberlain

Door Arm.

4. Take the curved door arm supplied with the Garage Door Opener and fit all as shown together. If you disconnect

the trolley you can move it easily in any position for the installation. Use M8 screws with lock nuts (not supplied).

5. Tighten the screws fully and back them off again 1/2 turn.

Open the garage door slowly and carefully by hand. Watch the movement of the door arm. If the Chamberlain Door

Arm hits the rail before the garage door is fully open, the angle of the arms must change. Close the garage door

and use another hole to change the angle of the system. Try again until the Chamberlain Door Arm does not hit the

rail anymore. In some cases raising the operator head is quicker.

max.225 mm

275 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Chamberlain 1703 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Chamberlain 1703 Manual

Product: