776521
8
Zoom out
Zoom in
Previous page
1/8
Next page
If you notice a RED Bat-Low light up which on the lower center of the window while you push the Bat-Low
button, that means the status of battery is at low condition. You can consider to replace a new set of battery
soonest. In a cold season, it is always recommended to put in new batteries at the beginning of winter.
Trouble Shooting
1. There is no Red Glow viewed when pushing the Bat-Check button: Need to check the polarity of
battery to be put in correctly. Then check either one battery might be very poor or dead.
2. Seems not too much help even this booster is used: Investigate if a current angle might not the
same as the camera lens. You have to test in difference angle for the best result. Of course you need to
prove the batteries are not poor before you try to do further testing.
3. I could see RED Glow from my IR camera at night, but the booster did not work: At the first,
press the BAT-CHECK to prove your booster is working fine. Then, check the IR sensor if it is plugged
into the IR-IN port. If it was ever the slave booster before, you need to check if the trigger source
option is resumed to the default for Sensor mode.
4. I bought two same boosters and both did not work properly: Be sure the 1st booster must be
remain the default with IR Sensor source setting, the second booster will be changed for Cable setting.
5. I noticed some of Slave will be always switched ON even camera did not work:
Double check for the trigger source option, improper connection in a chain will cause such problem.
Important Note: Please consult your dealer if you have any technical questions or problem while
you use the product before you request to send back for repairing. Most of problem issues may easily be
solved with help from the telephone support.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chal-Tec 10007109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chal-Tec 10007109 in the language / languages: English, German as an attachment in your email.

The manual is 0.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info