776521
7
Zoom out
Zoom in
Previous page
1/8
Next page
If you are using any WildSpy Cam Night Vision models and like to increase more illumination by adding IR
booster, an easy way is for you that you can connect the camera and booster directly. In this case, the
gooseneck adaptor will not be required for installation. Before connection, the booster will be required to
change the trigger source for the CABLE firstly. You can open the inner panel by loosing 3 screws and will
see the Option Jumper inside the panel. See Fig.2 .
Then resume the inner panel and proceed the proper connection with the attached cable. One plug is
inserted to the IR-IN port on booster and the other plug is inserted into the IR-EXT port on camera.
3. Work with More IR Extenders
In case you expect to have much illumination in order to get extreme best quality images or videos, you can
connect a chain of boosters up to 4 sets as you like. For the Master booster (the 1st booster), there is no
need to change the default setting except you are using WildSpy IR camera which using cable connection.
For other slave extenders, they are required to open the inner panel by loosing 3 screws and change the
jumper for the trigger source to CABLE (Pins 2-3). See Fig.2 .Then use the attached cable to plug one end
to the IR-IN port on the slave and other end to the IR-OUT of the Master. In the chain connection, the
previous unit is called Master and the next is called as Slave.
Mounting
The booster is mounted on a tree with the attached belt as the installation method shown as the right. And
then adjust a desired angle along with the scouting camera lens direction.
Battery Replacement
The average life of good quality battery Conditions affecting battery life are including usage of the booster in
video mode or using product in a cold climate. Do not try to mix old and new batteries together.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Chal-Tec 10007109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Chal-Tec 10007109 in the language / languages: English, German as an attachment in your email.

The manual is 0.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info