602323
10
Zoom out
Zoom in
Previous page
1/33
Next page
10
Introduction
How to install the
unit on your bicycle
Setting up the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
How to use the
computer
Measurement
Starting/Stopping measurement
This unit is a sensor-less cyclocomputer using GPS.
Caution: Measurement requires an environment in which GPS signals can be re-
ceived.
* For details regarding each screen, see “Screen flow” (page 8).
1
Press and hold the button for
2 seconds
The unit turns on and the GPS search screen
appears.
Wait several minutes until the GPS signal is
received.
When the GPS signal is received, the unit switches
from the GPS search screen to the measurement
screen.
2
Check that the GPS signal received icon
(
) turns on, and press the button
STOP changes to GO on the measurement screen,
and measurement starts.
3
Start riding
During measurement, measurement starts and
stops automatically in sync with the movement of
the bicycle.
* During measurement the speed unit flashes.
4
Press the button to stop measurement
STOP appears on the measurement screen, and measurement
stops.
Once measurement stops, press and hold the MODE button
to reset the measurement data to 0 (resetting operation) and
generate trip data up to that time.
* Data from when measurement starts to the reset operation is recorded as a single
trip, regardless of whether the unit is turned on or off. To continue measurement,
turn the power off without performing a resetting operation. For details, see “Reset-
ting the measurement data and generating the trip data” (page 12).
* For information on uploading trip data, see “Uploading the measurement data (trip
data)” (page 15).
5
Press and hold the button for 2 seconds
The unit turns off.
* If the unit is turned off without stopping measurement, it will start up in measurement
mode when it is turned back on.
GPS signal may not be received, thus the unit may stop measurement or may not display
appropriate measurements in the following locations or environments.
• In a tunnel, underground and building, between high-rise buildings, under an elevated
structure and arcade, etc.
• In bad weather (snow, rain, etc.)
• Near a high-voltage line or a mobile telephone relay station.
• When the computer display does not face to the sky.
Riding Stopped
GO
GPS search
screen
Measurement
screen
Speed unit
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-GL11 Stealth evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-GL11 Stealth evo in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-GL11 Stealth evo

Cateye CC-GL11 Stealth evo User Manual - German - 33 pages

Cateye CC-GL11 Stealth evo User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info