602323
9
Zoom out
Zoom in
Previous page
1/33
Next page
9
Introduction
How to install the
unit on your bicycle
Setting up the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
How to use the
computer
* If there is no button operation for 10 minutes while the GPS signal not received icon ( )
is flashing on the measurement screen, the unit automatically turns off. (Auto power off)
GPS signal may not be received, thus the unit may stop measurement or may not display
appropriate measurements in the following locations or environments.
• In a tunnel, underground and building, between high-rise buildings, under an elevated
structure and arcade, etc.
• In bad weather (snow, rain, etc.)
• Near a high-voltage line or a mobile telephone relay station.
• When the computer display does not face to the sky.
Standby screen
If there is no bicycle movement or button operation for 10 minutes while the GPS signal
received icon ( ) is displayed on the measurement screen, the unit automatically switches
to the standby screen.
When the bicycle starts moving again, the unit returns to its original state.
* The unit turns off the power automatically in 50 minutes with the standby screen dis-
played. (Auto power off)
* When the GPS signal cannot be received with the standby screen displayed, the GPS signal
not received icon (
) flashes. In such a case, the computer does not return to the mea-
surement screen even if you ride the bicycle.
Measurement screen
Power OFF
Standby screen
No operation
for 10 minutes
No operation
for 10 minutes
Changed
automatically
Changed by
operating
buttons
* When GPS is not received, measurement will not
start even if the button is pressed and GO is
displayed.
MODE
GPS search screen
Clock
0:00 – 23:59
[AM1:00 – PM12:59]
(Press & hold)
Power ON/OFF
GPS signal
received
Switches to measurement
screen when GPS signal can-
not be received
* STOP is displayed when
GPS is not received.
To be changed accord-
ing to the GPS signal
receiving status.
MODE
or
No opera-
tion for 50
minutes
Current speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
Speed unit
Measurement
starts
Measurement
stops
GO
STOP
Press &
release
Selected data
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-GL11 Stealth evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-GL11 Stealth evo in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-GL11 Stealth evo

Cateye CC-GL11 Stealth evo User Manual - German - 33 pages

Cateye CC-GL11 Stealth evo User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info