602323
8
Zoom out
Zoom in
Previous page
1/33
Next page
8
Introduction
How to install the
unit on your bicycle
Setting up the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
How to use the
computer
Screen flow
GPS search screen (when the power is turned on)
When the power is turned on, the GPS search screen will appear, and the unit will start
searching for GPS. Depending on whether or not the GPS signal is received, the behavior of
the unit changes as described below.
GPS signal reception Unit behavior
GPS signal received
The GPS signal received icon (
) turns on and
the unit switches to the measurement screen.
GPS signal not received (when
indoors or in an environment where
GPS signal reception is not possible)
Pressing the MODE button switches to the mea-
surement screen without GPS signal reception.
* It may take several minutes for the GPS signal to be received depending on reception conditions.
Measurement screen
This is the basic screen of this unit. The measurement screen has the states described below.
Screen Description
The GPS signal not received icon ( ) flashes
GPS cannot be received.
In this state, measurement is not possible even if you ride; it is only pos-
sible to check measurement data and perform a resetting operation.
* If no buttons are pressed for 10 minutes when the unit is in the GPS not
received state, the unit automatically turns off. (Auto power off)
The GPS signal received icon ( ) turns on and STOP flashes
Measurement is stopped while STOP is displayed.
Pressing the
button starts or pauses measurement (STOP appears).
The GPS signal received icon ( ) turns on and STOP is not displayed
Measurement starts and stops automatically in sync with the movement of
the bicycle.
* During measurement the speed unit flashes.
* If the GPS signal is lost while riding, the GPS non-receiving icon (
)
will flash and the unit will stop measurement. Measurement will resume
when the GPS signal is received again.
* For instructions on how to perform measurement, see “Measurement” (page 10).
This unit has three screens: a GPS search screen, a measurement screen, and a standby
screen. These screens are displayed alternatively according to GPS signal reception sta-
tus and bicycle movement. This section describes the flow of the screen after the power is
turned on until measurement is started.
MODE
GPS search screen
Measurement screen
Power OFF
Current speed
0.0 (3.0) – 105.9 km/h
[0.0 (2.0) – 65.9 m/h]
Speed unit
Clock
0:00 – 23:59
[AM1:00 – PM12:59]
(Press & hold)
Power ON/OFF
Changed
automatically
Changed by
operating
buttons
Measurement
starts
Measurement
stops
GO
STOP
GPS signal
received
Switches to measurement
screen when GPS signal can-
not be received
* STOP is displayed when
GPS is not received.
* When GPS is not received, measurement will not
start even if the
button is pressed and GO is
displayed.
To be changed accord-
ing to the GPS signal
receiving status.
Press &
release
Standby screen
No operation
for 10 minutes
No operation
for 10 minutes
MODE
or
No opera-
tion for 50
minutes
Selected data
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-GL11 Stealth evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-GL11 Stealth evo in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-GL11 Stealth evo

Cateye CC-GL11 Stealth evo User Manual - German - 33 pages

Cateye CC-GL11 Stealth evo User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info