740165
39
Zoom out
Zoom in
Previous page
1/58
Next page
Barometric Pressure
and Temperature
Measurement
You can use the watch to take barometric
pressure and temperature readings for your
current location.
Important!
Check the information at the link below
to find out how to ensure correct
readings.
l
Barometric Pressure and
Temperature Reading
Precautions
Checking the Current
Barometric Pressure and
Temperature
1. Enter the Barometer/Temperature Mode.
l
Navigating Between Modes
Entering the Barometer/Temperature
Mode starts measurement and displays
the current barometric pressure and
temperature.
After you enter the Barometer/
Temperature Mode, the watch takes
readings about every five seconds for
three minutes. After that, a
measurement is taken about every two
minutes.
Value Screen
Temperature
Barometric pressure
Barometric Pressure Graph Screen
The graph shows barometric readings taken
every two hours. You can use the graph to
view changes in barometric pressure over the
past 72 hours, which can be used to predict
upcoming weather.
Temperature
Barometric pressure graph
Barometric pressure
A trend
like this:
Means this:
Rising barometric pressure,
which indicates that upcoming
weather probably will be fair.
Falling barometric pressure,
which indicates that upcoming
weather probably will be bad.
Note
To retrigger measurement, press (C).
The watch will automatically return to
the Timekeeping Mode if you do not
perform any operation in the
Barometer/Temperature Mode for
about one hour.
Measurement ranges are shown
below. [- - -] will appear for the
measured value if it is outside the
allowable range.
Barometric pressure measurement:
260 hPa to 1,100 hPa (7.65 inHg to
32.45 inHg)
Thermometer measurement: -10.0°C
to 60.0°C (14.0°F to 140.0°F)
Large changes in barometric pressure
and/or temperature can cause past
data readings to be plotted outside of
the visible area of the graph. Though
plots are not visible, the data is still
maintained in watch memory.
Barometric Pressure Change
Indications
Whenever the watch detects a significant
change in air pressure readings (due to
sudden altitude change, or to the passage of
a low pressure or high pressure area), it will
perform a sound and/or vibration operation
and display a flashing arrow to let you know.
The arrow that appears shows the direction of
the pressure change. These alerts are called
“Barometric Pressure Change Indications”.
This
indicator:
Means this:
Sudden drop in pressure
Sudden rise in pressure
Sustained rise in pressure,
shifting to a fall
Sustained fall in pressure, shifting
to a rise
Important!
To ensure correct barometric pressure
change indicator operation, enable it in
a location where the altitude is
constant (such as a lodge, camp area,
or on the ocean).
A change in altitude causes a change
in air pressure. Because of this, correct
readings are impossible. Do not take
readings while ascending or
descending a mountain, etc.
1. Enter the Barometer/Temperature Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Barometer/
Temperature Mode setting screen.
Pointer
Operation Guide 3475
39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW3475 - GBD-H1000 G-SQUAD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info