Manual Casio QW3475 - GBD-H1000 G-SQUAD (page 37 of 58) (English)

740165

Zoom out

Zoom in

1/58

6. While comparing the difference between

the altitude you found on the map and the

altitude differential displayed by the

watch, advance towards your destination.

Current location altitude

Altitude differential indicator

●

When the altitude differential you found

on the map is the same as that

displayed by the watch, it means you

are close to your destination.

Note

●

[-----] will appear on the display when a

reading is outside the allowable

altitude measurement range (±3,000

m (±9,840 feet)), or if a measurement

error occurs.

Calibrating Altitude

Readings

To minimize the difference between locally

indicated and measured values, you should

update the reference altitude value before

setting off on and during treks or any other

activities where you take altitude readings.

Also, you can ensure accurate measurements

by checking a map local altitude indications or

some other source for your current location’s

altitude, and regularly calibrating watch

readings with the latest information while

mountain climbing.

Note

●

You can find out the altitude at your

current location from signs, maps, on

the Internet, etc.

●

Differences between actual altitude

and watch readings can be caused by

the factors below.

ー　

Changes in barometric pressure

ー　

Changes in temperature caused by

variations in barometric pressure

and by elevation

●

Though altitude readings can be taken

without calibration, doing so may

produce readings that are very

different from indications by altitude

markers, etc.

1. Enter the Altimeter Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds.

This displays the Altimeter Mode setting

screen.

Pointer

3. Use (A) and (D) to move the pointer to

[CALIBRATION].

4. Press (C).

5. Use (A) and (D) to move the pointer to

[MANUAL].

●

To return the altitude setting to its initial

factory default value, select [OFFSET

OFF].

6. Press (C).

7. Repeat the steps below to input the

altitude in your current location.

●

Use (A) and (D) to change the

underlined value or symbol. To specify

a negative value, display the minus (-)

sign.

●

Use (C) to move between digits.

●

To stop the setting operation, press (E)

and advance to step 9.

8. After all the values are the way you want,

press (C).

9. Use (A) and (D) to select whether or not

you want to save your current settings.

[YES] Saves current settings.

[NO] Discards current settings.

[RETURN]

This returns to the altitude

manual calibration screen.

10. Press (C) to complete the setting

operation.

After the setting operation is complete,

[SETTING COMPLETED] will appear for

a few seconds, and then the Altimeter

Mode setting screen will re-appear.

11. Press (E) to exit the setting screen.

Setting Up the Auto

Measurement Interval

You can select an auto measurement interval

of either five seconds or two minutes.

1. Enter the Altimeter Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds.

This displays the Altimeter Mode setting

screen.

Pointer

3. Use (A) and (D) to move the pointer to

[INTERVAL].

4. Press (C).

5. Use (A) and (D) to select an auto

measurement interval.

[2 MINUTES]

Readings taken every

second for the first three

minutes, and then every

two minutes for about the

next 12 hours.

[5 SECONDS]

Readings taken every

second for the first three

minutes, and then every

five seconds for about one

hour.

6. Press (C) to complete the setting

operation.

After the setting operation is complete,

[SETTING COMPLETED] will appear for

a few seconds, and then the Altimeter

Mode setting screen will re-appear.

7. Press (E) to exit the setting screen.

Operation Guide 3475

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio QW3475 - GBD-H1000 G-SQUAD Manual

Product: