Manual Casio QW3475 - GBD-H1000 G-SQUAD (page 36 of 58) (English)

740165

Zoom out

Zoom in

1/58

Altitude Measurement

The watch takes altitude readings and

displays results based on air pressure

measurements taken by a built-in pressure

sensor.

Important!

●

The altitude readings displayed by the

watch are relative values that are

calculated based on barometric

pressure measured by the watch’s

pressure sensor. This means that

barometric pressure changes due to

weather can cause altitude readings

taken at the same location to be

different. Also note that the value

displayed by the watch may be

different from the actual elevation and/

or sea level elevation indicated for the

area where you are located. When

using the watch’s altimeter while

mountain climbing, it is recommended

that you regularly calibrate its readings

in accordance with local altitude

(elevation) indications.

Calibrating Altitude Readings

●

The altitude correction value you

specify and/or barometric pressure

changes may cause a negative value

to be displayed.

●

Check the information at the link below

to find out about how to minimize

differences between readings

produced by the watch, and values

provided by local altitude (elevation)

indications.

Altitude Reading Precautions

Checking the Current

Altitude

1. Enter the Altimeter Mode.

Navigating Between Modes

Changing Displayed Information

Entering the Altitude Mode will start

altitude measurement and display the

altitude at your current location.

●

The watch takes altitude readings every

second for about the first three minutes.

After that, it takes readings according to

the watch’s auto measurement interval

setting.

●

Check the information at the link below

to find out how to configure the auto

measurement interval.

Setting Up the Auto Measurement

Interval

●

To retrigger measurement, press (C).

●

Press (E) to return to the Timekeeping

Mode.

Note

●

Measurement range: -10,000 m to

10,000 m (-32,800 to 32, 800 feet)

(Measurement unit: 1 meter (5 feet))

Note that calibrating altitude readings

will cause a change in the

measurement range.

●

[----] will appear for the measured value

if it is outside the allowable range.

Value Screen

②

①

Graph Screen

①②

③

A　Current location altitude

B　Differential between reference altitude

and current altitude

C　Altitude graph

240m

Current reading

Setting a Reference Altitude

and Taking Relative Altitude

Readings

You can use the procedure below to display

the differential between a reference altitude

and another altitude. This makes it easy to

measure the altitude differential between two

points while climbing or trekking.

1. Use the contour lines on your map to

determine the altitude differential between

your current location and your destination.

2. Take an altitude reading of your current

location.

Checking the Current Altitude

3. Hold down (A) for at least two seconds.

This displays the Altimeter Mode setting

screen.

Pointer

4. Use (A) and (D) to move the pointer to

[DIFF RESET].

5. Use (C) to set your current location’s

altitude as the reference altitude.

This makes the altitude differential ±0 m

(±0 feet).

Operation Guide 3475

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio QW3475 - GBD-H1000 G-SQUAD Manual

Product: