740165

Casio QW3475 - GBD-H1000 G-SQUAD Manual

34
Zoom out
Zoom in
Previous page
1/58
Next page
3-Point Calibration
1. Enter the Compass Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Digital Compass Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[CALIBRATION].
4. Press (C).
5. Use (A) and (D) to move the pointer to [3-
POINT].
6. Press (C).
This displays the 3-point calibration
screen.
7. While keeping the watch horizontal, press
(C).
This starts calibration of the first point,
which causes [PLEASE WAIT] to appear
on the display. [ROTATE 180°] will appear
when calibration is successful.
8. Keeping the LCD of the watch pointing
upwards, rotate it 180 degrees. Be as
exact as possible.
9. While keeping the watch horizontal, press
(C).
This starts calibration of the second point,
which causes [PLEASE WAIT] to appear
on the display. [TURN OVER] will appear
when calibration is successful.
10. Turn the watch over so the LCD is pointing
at the ground.
Ground
11. While keeping the watch horizontal, press
(C).
This starts calibration of the third point,
which causes [PLEASE WAIT] to appear
on the display. [SUCCESSFUL] will
appear when calibration is successful. A
few seconds later, the watch will return to
the Digital Compass screen.
Note
●
If the calibration operation fails, the
message [FAILED RETRY?] will
appear. To retry calibration, press (C).
To stop a calibration operation, press
(E).
●
Pressing (E) during the above
procedure will return to the calibration
method selection screen.
Figure 8 calibration
1. Enter the Compass Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Digital Compass Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[CALIBRATION].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[FIGURE 8].
6. Press (C).
This displays the figure 8 calibration
screen.
When the screen shown above appears,
move your arm in a figure 8 pattern as
shown in the illustrations below.
●
Allow your wrist to twist.
●
Keep your arm as far as possible from
your body as you move it.
●
[SUCCESSFUL] will appear when
calibration is successful. A few seconds
later, the watch will return to the Digital
Compass screen.
Note
●
If the calibration operation fails, the
message [FAILED RETRY?] will
appear. To retry calibration, press (C).
To stop a calibration operation, press
(E).
●
Pressing (E) during the above
procedure will return to the calibration
method selection screen.
Operation Guide 3475
34
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW3475 - GBD-H1000 G-SQUAD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW3475 - GBD-H1000 G-SQUAD in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info