480711
151
Zoom out
Zoom in
Previous page
1/167
Next page
40
AT+CBC Displays the battery status
of the FOMA terminal.
Result: +CBC:<bcs>,<bcl>
bcs:
0 :
FOMA terminal is powered by the battery.
1 :
FOMA terminal is not powered by the battery.
2 :
FOMA terminal is not connected to the battery.
3 :
FOMA terminal is out of transmission due to
the power-supply error.
bcl:
0 : Battery has run out, or battery is not
connected.
1-100 : Battery remained
AT+CBC
+CBC:0,70
OK
AT+CBC?
ERROR
AT+CBC=?
+CBC:(0-3),(0-100)
OK
AT+CBST
[&F] [&W]
Changes the bearer service
type.
Format: AT+CBST=<
n
>,1,0
n
=11664,000bps (bit transparent) (initial
value)
n
=13464,000bps (multimedia)
AT+CBST=134,1,0
OK
AT+CBST?
+CBST:134,1,0
OK
AT+CBST=?
+CBST:(116,134),
(1),(0)
OK
AT+CDIP =
n
[&F] [&W]
Sets whether to notify the
called sub address for the
incoming call. Inquires for
Multi number subscription.
n
= 0 : Not notify the called sub address
(initial value).
n
= 1 : Notify the called sub address.
AT+CDIP?
: Displays the current setting.
+CDIP:
n
,
m
m
=0 :
You do not subscribe to Multi number.
m
= 1 : You subscribe to Multi number.
m
= 2 : Unknown
AT+CDIP=0
OK
AT+CDIP ?
+CDIP:0,1
OK
AT+CEER Displays the reason for
disconnection of the
previous call.
Result: +CEER:<report>
report: List of disconnection reasons (p.51).
AT+CEER
+CEER:36
OK
AT+CGDC ONT
Sets the access point name
(APN) for packet origination.
p.48 p.48
AT+CGEQMIN
Registers a criterion to be used
to decide whether or not to allow
the QoS (quality of service) that is
informed from the network side
when PPP packet
communication is established.
p.48 p.48
AT+CGEQREQ Sets the QoS (quality of
service) to be requested to
network when originating a
PPP packet communication.
p.49 p.49
AT+CGMR Displays the version of the
FOMA terminal.
AT+CGMR
12345xxxxxxxxxxx
OK
AT+CGREG=
n
[&F] [&W]
Specifies whether to notify
the network registration
condition.
The returned notification
displays whether you are
inside or out of service.
n
= 0 : Not informed (initial value).
n
=1 : Informed.
Informed when switching between
"Inside the service area" and "Outside
the service area" is completed.
AT+CGREG?
Displays the current setting.
+CGREG <
n
>, <stat>
n
: Set value
stat
0: Out of packet area
1: Within packet area
4: Unknown
5: Within packet area
AT+CGREG=1
OK (Set to informed)
AT+CGREG?
+CGREG: 1,0
OK
AT+CGREG=?
+CGREG: (0,1)
OK
(Outside the service area)
(When you move from
"outside the service
area" to "inside the
service area".)
+CGREG:1
AT+CGSN
Displays the product number
of the FOMA terminal.
AT+CGSN
12345xxxxxxxxxxx
OK
AT command Outline Parameter/description
Command execution example
CA-01C_E_Manual_02.fm 40 ページ 2011年5月3日 火曜日 午後12時30分
151


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CA-01C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CA-01C in the language / languages: English as an attachment in your email.

The manual is 9,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info