480711
150
Zoom out
Zoom in
Previous page
1/167
Next page
39
AT&W
n
Stores the current settings. Only
n
= 0 can be specified (can be omitted). AT&W0
OK
AT&W
OK
AT&W?
ERROR
AT&W
?
ERROR
AT DANTE Displays the FOMA terminal
signal reception level.
0
FOMA terminal signal reception level is displayed as
out of area.
1
FOMA terminal signal reception level is
0
or 1
bar.
2
FOMA terminal signal reception level is 2 bars.
3
FOMA terminal signal reception level is 3 bars.
AT DANTE
DANTE:3
OK
AT DANTE ?
DANTE:(0-3)
OK
AT DGANSM=
n
Sets the reject/permit mode
setting for the packet
incoming call. This
command is effective for
those incoming packet calls
after the setting command is
input.
n
=0
Disables the incoming call reject (AT
DGARL)/permit setting (AT
DGAPL) (initial
value).
n
=1 Enables the incoming call reject
setting.
n
=2 Enables the incoming call permit
setting.
AT DGANSM?
Displays the current setting.
AT DGANSM=0
OK
AT DGANSM?
DGANSM:0
OK
AT
DGAPL=
n
[,cid]
Sets APN, which permits
incoming packet calls, by
using <cid> parameter
defined by
+CGDCONT
n
=0 Adds the APN defined by <cid> to
incoming call permission list.
n
= 1 : Deletes the APN defined by <cid>
from incoming call permission list.
If <cid> is omitted, this will apply to all cid.
AT DGAPL?
Displays incoming call permission list.
AT DGAPL =0,5
OK
AT DGAPL?
DGAPL:1
OK
AT DGAPL =1
OK
AT DGAPL?
OK
AT
DGARL=
n
[,cid]
Sets APN, which rejects
incoming packet calls, by
using <cid> parameter
defined by
+CGDCONT
n
= 0 : Adds the APN defined by <cid> to
incoming call rejection list.
n
= 1 : Deletes the APN defined by <cid>
from incoming call rejection list.
If <cid> is omitted, this will apply to all cid.
AT DGARL?
Displays incoming call rejection list.
AT DGARL =0,5
OK
AT DGARL?
DGARL:1
OK
AT DGARL =1
OK
AT DGARL?
OK
AT DGPIR=
n
This command validates the
setting for notifying Caller ID
when sending/receiving
packet communication.
Even in the dial up network
setting, you can also add
186 (notify) or 184 (not
notify) to the access point
number. (p.27)
n
= 0 : Uses APN as it is (initial value).
n
= 1 : Uses APN by adding "184". (Caller ID
is always not sent.)
n
= 2 : Uses APN by adding "186". (Caller ID
is always sent.)
AT DGPIR?
Displays the current setting.
AT DGPIR =0
OK
AT DGPIR?
DGPIR:0
OK
AT DRPW Displays the indicator value
of the receiving power of the
FOMA terminal.
AT DRPW
DRPW:0
OK
AT DRPW=?
DRPW:(0-75)
OK
AT+CAOC Inquires for the current
charge.
AT+CAOC
+CAOC:"000014"
OK
AT command Outline Parameter/description
Command execution example
CA-01C_E_Manual_02.fm 39 ページ 2011年5月3日 火曜日 午後12時30分
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CA-01C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CA-01C in the language / languages: English as an attachment in your email.

The manual is 9,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info