480711
149
Zoom out
Zoom in
Previous page
1/167
Next page
38
AT Command List
AT commands available on FOMA terminal
d The following abbreviations are used in the AT command list;
[&F] : Command of which setting is initialized by AT&F command.
[&W] : Command of which setting is saved by AT&W command. The setting can be retrieved by ATZ
command.
d When you make a call via an external device or using AT command, the call is made from Number A in
A mode/Dual mode, and from Number B in B mode.
Modem port command list
The followings are the usable commands for "FOMA CA01C (
モデム
)" (modem):
d When you execute commands via Bluetooth connection, a single-byte space is inserted after each ":"
in the results.
AT command Outline Parameter/description
Command execution example
A/ Executes the last executed
command again. No carriage
return is necessary.
A/
OK
AT
The modem function of a FOMA terminal is
controllable by adding the command of this
table after this command.
*
OK is answered even when only AT is entered.
AT
OK
AT%V Displays the version of the
FOMA terminal.
AT%V
Ver1.00
OK
AT&C
n
[&F] [&W]
Selects the operating
condition of the circuit CD
signal to DTE.
n
=0 CD is always ON.
n
=1
CD changes according to the carrier of
the other party's modem (initial value).
AT&C1
OK
AT&D
n
[&F] [&W]
Selects the operation to
take place when the circuit
ER signal received from DTE
transits between ON and
OFF.
n
=0 Ignores ER status (always assumed
to be ON).
n
=1
When ER changes from ON to OFF, it
becomes an on-line command status.
n
=2
If ER changes from ON to OFF, a
connection is disconnected and it will be in
an off-line command status (initial value).
AT&D1
OK
AT&E
n
[&F] [&W]
Selects how to display the
connection speed.
n
=0
Displays the wireless network
transmission speed.
n
=1 Displays the DTE serial transmission
speed (initial value).
AT&E 0
OK
AT&F
n
Restores all of registers to
their defaults. If this
command is input during
communication, the line will
be disconnected.
Only
n
= 0 can be specified (can be omitted). (At the time of off-line
mode)
AT&F
OK
AT&F?
ERROR
AT&F
?
ERROR
(At the time of on-line
command mode)
AT&F
NO CARRIER
(Change to off-line
mode)
AT&S
n
[&F] [&W]
Sets the Data Set Ready
signal to be output to DTE.
n
=0 DR is always ON (initial value).
n
=1 DR signal is ON when the line is
connected (when the communication
call is established).
AT&S 0
OK
CA-01C_E_Manual_02.fm 38 ページ 2011年5月3日 火曜日 午後12時30分
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CA-01C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CA-01C in the language / languages: English as an attachment in your email.

The manual is 9,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info