624481

Casio 5240 - GW-A1000 Manual

4
Zoom out
Zoom in
Previous page
1/9
Next page
Operation Guide 5240
E-39
Confi guring Current Time and Day Settings Manually
You can confi gure current time and day settings manually when the watch is unable to
receive a time calibration signal.
To change the current time setting manually
Pull out the crown.1.
This will cause the x
x
Second Hand to move to the
city code of the currently selected Home City.
If you do not perform any operation with the crown
x
for about two minutes after pulling it out, crown
operations will become disabled and the hand will
not move if you rotate the crown. If this happens,
push the crown back in and then pull it out again.

@
TYO (TOKYO)
E-38
Hold down 2. A for about one second to cycle through the
summer time settings as shown below.
AA
AT (AUTO) STD DST
A
After the setting is way you want, push the crown back in.3.
*
E-37
To switch between standard time and summer time manually
Perform steps 1 and 2 under “To confi gure Home City settings” (page E-34).1.
Selecting a city code will cause the
x
z
Hour Hand,
c
Minute Hand, and
v
Upper Dial Hand to move automatically to the current time for the selected
city code.
If you will use the watch in a city that is not included in the city code list, select a
x
city code that is in the same time zone as your city.
Displaying the Home City Settings screen will cause the
x
b
Lower Dial Hand to
move to AT (auto switching), STD (standard time), or DST (daylight saving time).
AT (AUTO)
The watch automatically switches between standard time and daylight
saving time in accordance with its calendar.
STD The watch always shows standard time.
DST The watch always shows daylight saving time.
E-36
STD/DST Switching
You can select summer time or standard time independently for each city. The initial
default setting for all cities is AT (AUTO).
Normally you should use the AT (AUTO) setting because it automatically switches
between summer time and standard time. You should change the setting to STD
(standard time) or DST (summer time) in the following cases.
When using a time of a location that is not included in the watch’s list of 29 cities
−
When the preset AUTO standard time/summer time timing is incorrect for some −
reason
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
Note that you cannot switch between
x STD (standard time) and DST (daylight
saving time) while UTC* is selected as your Home City.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The *
reference point for UTC is Greenwich, England.
E-35
If you do not perform any operation with the crown for about two minutes after x
pulling it out, crown operations will become disabled and the hand will not move
if you rotate the crown. If this happens, push the crown back in and then pull it
out again.
For details about city codes, see the “City Code Table” at the back of this
x
manual.
Rotate the crown to move the 2.
x
Second Hand to the city
code you want to select as your Home City.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand and
n
Day Indicator move to the
current time and day for that city code.
Push the crown back in to return to the Timekeeping 3.
Mode.

@
+
6
B
E-34
Confi guring Home City Settings
The Home City is location where you will normally use the watch. You can choose
from a selection of city codes that represent 29 cities around the globe.
To confi gure Home City settings
Note
This watch does not have a city code that corresponds
x
to Newfoundland.
Pull out the crown.1.
This will cause the
x
x
Second Hand to move to the
city code of the currently selected Home City.
This indicates the city code setting mode.
x

@
TYO (TOKYO)
E-33
Timekeeping
To enter the Timekeeping Mode, hold down C at least two seconds.
Hands and Indicators
z
Hour Hand
x
Second Hand
c
Minute Hand
v
Upper Dial Hand: Indicates the current hour in the
Home City time in 24-hour format.
b
Lower Dial Hand: Points to the day of the week.
n
Day Indicator

+
6*
@>B
E-32
To select a mode
Each press of C will cycle between modes. The currently selected mode is indicated
by the
b
Lower Dial Hand.
*
Timekeeping Mode World Time Mode
Alarm Mode Countdown Timer Mode
C
C
C
C
Stopwatch Mode
C
E-31
Selecting a Mode
With this watch, everything starts from the Timekeeping Mode.
To determine the watch’s current mode
Check what the
b
Lower Dial Hand is indicating as shown
under “To select a mode” (page E-32).
To return to the Timekeeping Mode from any other
mode
Hold down C for at least two seconds.

*
E-30
Mode Reference Guide
Your watch has fi ve “modes”. The mode you should select depends on what you want
to do.
To do this: Enter this mode: See:
Confi gure Home City and DST (daylight saving time) settings x
Perform a time calibration signal receive operation x
Change the Auto Receive on/off setting x
Confi gure time and day settings manually x
Measure temperature x
Timekeeping Mode E-33
View the current time in one of 29 cities around the globe
x
Confi gure World Time City and summer time settings x
Swap the Home City and World Time City x
World Time Mode
E-53
E-54
E-57
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer
Countdown Timer
Mode
E-61
Set an alarm time x
Turn the alarm ON or OFF x
Alarm Mode
E-64
E-67
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5240 - GW-A1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5240 - GW-A1000 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5240 - GW-A1000

Casio 5240 - GW-A1000 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info