480782
10
Zoom out
Zoom in
Previous page
1/27
Next page
NOTES:
• If the Pairing process is not completed within two minutes the G4 will
return to Standby mode.
The priority schedule of your G4 has been set to avoid incoming intercom
calls interrupting GPS instructions in progress. In such case the intercom
caller will hear a busy signal and you will hear two beeps, indicating that
an intercom caller is trying to page you. (see section 4.3 for details on audio
priorities of paired devices).
6.3 MP3 MUSIC WIRELESS OPTION  A2DP
Your G4 is designed to receive wireless stereo music from A2DP
sources and mobile phones that support the Bluetooth A2DP
and AVRCP proles (mostly 3rd generation devices).
Using a Bluetooth device that supports the AVRCP prole will allow you to
operate all major A2DP source functions directly from your G4.
NOTE: The G4 can also receive audio via the enclosed cable from non-
Bluetooth MP3 Players or audio sources as described in section 7.2
While listening to music from an A2DP source, you will not miss
any mobile or intercom calls, as the headset will automatically stop
the music and give preference to the incoming call. However, after
you terminate your call, some MP3 sources may not automatically
continue and require manual re-activation.
The scala rider G4 allows you to pair your mobile phone for use
during phone calls and also as a Stereo Bluetooth (A2DP) music player,
if your phone supports this feature.
The scala rider G4 also allows you to use two dierent A2DP devices
interchangeably: simply pair an A2DP music player (MP3 Player or
Adapter) to the G4 for music and use the mobile phone for phone
calls and/or music (if A2DP compatible) as described in Section 6.1.
SETTING UP YOUR MP3 PLAYER FOR BLUETOOTH STEREO A2DP
TRANSMISSION
To use a Bluetooth Stereo (A2DP) enabled MP3 Player or Adapter to
listen to stereo music, you must rst pair the device to your G4.
PAIRING THE G4 TO AN MP3 PLAYER OR A2DP ADAPTER
NOTE: If your A2DP source is integrated inside your Mobile Phone, then
you should pair it with your G4 as described in section 6.1 above
1. Turn on your MP3 Player or A2DP Adapter, and make sure that its
Bluetooth function is activated.
2. With the G4 turned ON, press and hold the Mobile Button for at
least six seconds until the Red and Blue Lights begin alternating
rapidly.
3. Search for Bluetooth headsets on your MP3 Player by following the
device’s instructions.
NOTE: For use of a Bluetooth adapter, follow the device’s instructions.
4. After a few seconds the MP3 Player will list “scala rider G4
as a discovered device. Select it and follow your MP3 Player’s
instructions to accept the pairing.
5. If your MP3 player prompts for a PIN or Passkey enter 0000 (four zeros).
6. Once pairing is complete, your MP3 Player or Adapter may conrm that
pairing has succeeded, and the G4 will begin ashing slowly in Blue.
NOTE: If the Pairing process is not completed within two minutes the G4
will return to Standby mode.
A2DP Audio Source Selection:
If an A2DP Music Player is paired, the headset will use it as the default
audio source. To change the audio source from the current device
to the other device, stop the music playing from the current device
10
scala rider
®
G4
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info