480782
9
Zoom out
Zoom in
Previous page
1/27
Next page
English
6.1 MOBILE PHONE
To use your mobile phone with the scala rider G4, you must
rst pair the G4 to your mobile phone.
Pairing is a one-time process. Once the G4 is paired to a
specic mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
If the connection between the phone and G4 is lost, tap the Mobile
Button on your G4 to reconnect the devices.
PAIRING THE G4 TO A BLUETOOTH MOBILE PHONE:
1. Turn on your phone and make sure its Bluetooth function is activated.
Turn on your G4 by pressing the Mobile Button for at least four
seconds resulting in three blue ashes.
2. With the G4 turned ON, press and hold the Mobile Button for
at least six seconds until the Red and Blue Lights begin rapidly
alternating.
3. Search for Bluetooth devices on your phone by following the phone’s
instructions. Consult your phones User Manual for more information.
4. After a few seconds the phone will list “scala rider G4” as a
discovered device. Select it and follow your phone’s instructions to
accept the pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will conrm that pairing has succeeded and the G4 will
begin ashing slowly in Blue.
NOTES:
If the Pairing process is not completed within two minutes, the G4 will return
to Standby mode.
Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music
(A2DP), even if the phone has an MP3 player function. Consult your mobile
phone’s User Manual for more information.
With some mobile phones, you may need to tap the Mobile Button
to connect the G4 to the phone after pairing is complete. The G4 will
automatically connect to the last phone it is paired with.
6.2 GPS DEVICE
To use a Bluetooth enabled GPS device with the
scala rider G4, the two must rst be paired. This will
allow your GPS to transmit navigation instructions and audio to the
speakers of your G4.
NOTE: Not all Bluetooth enabled GPS devices allow connections to
Bluetooth headsets or communication systems. Among others, any
such GPS unit must be compatible with the Bluetooth “Handsfree”
gateway protocol. Please consult your GPS device’s User Manual for more
information.
PAIRING THE G4 TO A GPS DEVICE:
1. Turn on your GPS.
2. With the G4 turned ON, press and hold the Volume Up Button for
at least six seconds until the Red and Blue Lights begin ashing
simultaneously.
3. Search for Bluetooth headsets on your GPS device by following the
device’s instructions. Consult your GPS device’s User Manual for
more information.
4. After a few seconds the GPS will list “scala rider G4” as a
discovered device. Select it and follow your GPSs instructions to
accept the pairing.
5. If your GPS device prompts for a PIN or Passkey enter 0000 (four zeros).
6. Your GPS device will conrm that pairing has succeeded. The
headset will begin ashing slowly in Blue.
7. If you wish to use a Bluetooth mobile phone to make and receive
calls through the G4, you should pair your mobile phone to your
GPS device by following the instructions in your GPS manual.
9
scala rider
®
G4
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info