Manual Cardo Scala rider G4 (page 12 of 27) (English)

480782

Zoom out

Zoom in

1/27

There are two ways to search for a new radio station on your G4:

Seek and save:

1. While the Radio is on, select the station number from one to six

that you wish to set by tapping the CHANNEL “B” button until the

desired station is found.

2. Press and hold the Volume Up or Volume Down Button for three

seconds.

• Pressing Volume Up will search upwards (higher frequency).

• Pressing Volume Down will search downwards (lower frequency).

3. Once a station is found, searching stops and you can hear the

station.

4. To continue searching, press the Volume Up or Volume Down Button

again for three seconds.

5. Tap the CHANNEL “B” button within 20 seconds of nding the

station to save the current station.

6. If you don’t save the station, the Radio will exit search mode

without saving the current station. You can still continue to listen

to the current unsaved station. Tapping the CHANNEL “B” Button in

this case will move to the next saved station.

Scan and save:

1. While the Radio is on, select the station number from one to six

that you wish to set by tapping the CHANNEL “B” button until the

desired station is found.

2. Press and hold the Volume Up button for 6 seconds.

3. The device will begin to Scan by searching upwards for the

next station. Once a station is found, searching pauses for a few

seconds while you hear the current station and then the G4 will

automatically continue to the next station.

4. To stop Scanning and stay on the current station, tap the Volume

Up Button again.

5. Tap the CHANNEL “B” button within 20 seconds of nding the

station to save the current station.

6. If you don’t save the station, the Radio will exit search mode

without saving the current station. You can still continue to listen

to the current unsaved station. Tapping the CHANNEL “B” Button in

this case will move to the next saved station.

NOTE: Press CHANNEL “B” button during radio Scan to Fast Save the current

station directly into the Preset Channel number you were last listening to.

Automatic Radio Tuning: Automatically search for and nd 6 new

“on the go” radio stations with one button press.

This feature makes nding new stations fast and easy by creating a

temporary list of “on the go” radio stations.

While the radio is on, press and hold the Volume Down Button for 6

seconds, and the G4 will search upwards from the current frequency

and store the next 6 FM stations it discovers as “on the go” stations.

You can repeat this process as many times as you wish, searching for

the next 6 FM stations each time.

Now you can cycle through these stations by tapping the CHANNEL

“B” button.

NOTE: These 6 temporary “on the go” stations cannot be saved and do not

replace the permanent Saved Radio Stations you may have set using the

“Saving a selected station” procedure. Turning OFF and ON the G4 will clear

out your Automatic Radio Tuning stations, and restore the original saved

radio stations.

scala rider

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cardo Scala rider G4 Manual

Product: