Manual Carat RS-3300 (page 42 of 104) (English, German, Dutch, Danish, French, Swedish, Norwegian)

816477

Zoom out

Zoom in

1/104

HOW TO HOLD THE MACHINE

• Always hold the machine with both hands, with

the right hand on the main handle and with the

left hand on the side handle. (This applies even if

the operator is left-handed)

• Do not stand directly in line with the blade.

Rather, stand in such a way that, if it kicks back,

you will not be in the path of the blade.

• Never lean over the blade path. That would put

your body in line with the blade if it kicks back.

• Do not cut above shoulder height.

• Never cut while standing on a ladder or other unstable platform.

BEFORE CUTTING

• Check the area where the cut is to be made to ensure that it is clear of objects which could cause the

operator to stumble.

• Before cutting, it is sometimes useful to mark the line of cut with chalk or the like. For straight cutting, a

wood plank is also useful in guiding the machine to make a straight cut.

• Ensure that all bystanders are at a safe distance.

• Ensure that all safety equipment is in place.

PROPER SUPPORT FOR THE WORKPIECE

• Support the workpiece on in such a way that the

kerf will not pinch down on the blade.

• Secure the workpiece so that it will not roll, slip

away or move due to vibration while cutting

• The cutting sequence is important when making

cutouts. Always make the last cut in a way that

avoids the blade being pinched. Thus, make the

bottom horizontal cut first, then the sides and

finally make the top horizontal cut last.

• Make note of the weight of the workpiece and the direction which it will fall when it is cut through.

• Whenever there is a situation where severing the workpiece will cause a hazardous situation, leave a tab

of material intact and finish off the operation with a chisel or the like.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carat RS-3300 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 2.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carat RS-3300 Manual

Product: