Manual Carat RS-3300 (page 41 of 104) (English, German, Dutch, Danish, French, Swedish, Norwegian)

816477

Zoom out

Zoom in

1/104

WATER FEED VALVE

The water flow is controlled by the water feed valve. The water to the

blade may be finely adjusted to the required amount.

NOTE: Contaminants in the water supply can easily plug up the

fine water nozzles in the blade guard. Ensure that the supply

water is clean. If you find that there is no water flow to the

blade, then clean out the water feed system on the machine with

compressed air.

OVERLOAD PROTECTION, OVERHEAT PROTECTION

Overload & Load Warning Lamp

When full load is reached, the load warning lamp will flash red. If

full load is exceeded and sustained for too long, the motor will shut

down and the load warning lamp will glow solid red. In this case, the

motor must be first shut off and then restarted. When this happens,

the motor will very likely be near overheating, so it is also a good

idea to run the motor at no load for a few minutes to cool it before

continuing.

Overheat Thermal Protection

If the temperature of the motor gets too high, the thermal protection will shut the motor down. The switch

must be first shut off and then restarted. When this happens, do not immediately start cutting after restarting

the motor. Always run the machine at no load for a few minutes to return to a normal operating temperature

before continuing.

CAUTION: The motor will be damaged if it is repeatedly overloaded or overheated. Always cool the

motor by running at no load for a few minutes whenever it stops from either overheat or overload.

SET UP

• Connect the water supply

• Check for water leaks

• Connect to the power supply

THE SWITCH:

To start the machine, first press the Release Button, then press the

Trigger Switch.

To stop the machine, release the Trigger Switch.

Open

Closed

Water Feed

Valve

Load Warning Lamp

Trigger Switch

Release Button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carat RS-3300 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 2.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carat RS-3300 Manual

Product: