Manual Carat RS-3300 (page 40 of 104) (English, German, Dutch, Danish, French, Swedish, Norwegian)

816477

Zoom out

Zoom in

1/104

load on the motor and increase wear on the mechanism. Repeat for the other guide tensioner.

7. Use the T-handle wrench on the arbor bolt and rotate it back and forth while tightening the drive

tensioner knob until there is just enough tension so that the drive wheel is turning the blade without

skidding. Then tighten a further 1/4 turn. Do not over tension.

8. Slide the drive wheel cover plate into position over the drive wheel and tighten the thumb knob.

9. The drive tension will need to be periodically adjusted because, over time, the drive wheel and blade

interface will wear. When this happens, tighten the drive tensioner slightly, just enough to keep the blade

from slipping.

WARNING: Never adjust the drive tension while the saw is running.

NOTE: Always replace the drive wheel with a new one when replacing a worn blade. The drive wheel and

blade wear together and should be replaced as a set.

Inspect the blade before use. It must not be cracked, warped or damaged in any way that would cause a hazard

in operation. Loose diamond segments can be ejected at high speed, causing possible injury. Always check

that the diamond segments are not under cut. If the diamond segments are thinner or nearly thinner than the

blade core, the kerf will be too tight fitting and could easily lead to kickback.

Inspect the blades for segment damage, or any other damage which could cause hazardous operation.

SPLASH GUARDS

The spring-loaded splash guards are useful to help contain slurry which splashes toward the back. The upper

guard has an over-center spring which will lock into the fully open position if it is pulled all the way back. The

lower guard has a clip which can be used to lock the guard in the fully open position.

WATER CONNECTION

Water is a basic requirement for this tool. The water also serves as a coolant to avoid the working surface of

the diamond segments from overheating. Water also keeps down dust and flushes away abrasive particles.

WARNING: Check all connections of the water feed system to ensure there are no leaks. Inspect hoses

and other critical parts which could deteriorate.

WARNING: The maximum water pressure should not exceed 70 psi (4 bar).

Note: Use a wet vacuum to collect cooling water if nearby objects could be damaged by water.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Carat RS-3300 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 2.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Carat RS-3300 Manual

Product: