816479
22
Zoom out
Zoom in
Previous page
1/80
Next page
22
 
Make sure that a suitable dust extractor of class M is
connected.
The suction pipe must not be clogged. If this is the case,
remove the constipation before cutting!
6.5 Stopcuttingoperation
Use the red stop switch on the motor to stop the machine.
 
Maintenance works necessary for optimum and trou-
ble-free operation are described in the following sections.
- If an increased wear of parts is revealed by regular
inspections, reduce the maintenance intervals!
- Draw up a maintenance log aer every maintenance!
The log assists in error analysis, enables adjusting the
intervals to actual usage conditions and validating
guarantee claims.
- If you have any queries on maintenance works and
intervals: contact manufacturer.
Before performing any maintenance, make sure the
machine is disconnected from electrical power.
For long-term quality, please perform the following
maintenance actions aer using the machine
- Visually inspect the entire machine.
- Clean the flange and blade mounting.
- Clean engine (housing + cooling fans), water tank, water
pump, water pump filter, water hoses and nozzles, table
guide rails, table wheels.
- Make sure all bolts and screws are tightened.
Before using the machine, make sure that all the above
actions have been performed.
 
If no return or disposal agreement was made, send the
dismantled components for recycling:
- Scrap metal parts.
- Hand over plastic parts for recycling.
- Dispose of other components assorted according to
material characteristics.



According to the European directive 2012/19/EU on
electrical and electronic waste and version transposed
into national law, used power tools must be collected
separately and sent for recycling in an environmen-
tal-friendly manner.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat MultiCoup 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat MultiCoup 350 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 14.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info